Buy kopa-houtskooloven.be ?
We are moving the project
kopa-houtskooloven.be .
Are you interested in purchasing the domain
kopa-houtskooloven.be ?
domain@kv-gmbh.de · 0541-91531010
Buy kopa-houtskooloven.be ?
What is marine acoustics?
Marine acoustics is the study of sound in the ocean and its interaction with marine life, the seafloor, and the water itself. It involves the use of underwater sound to study and monitor marine environments, including the behavior and communication of marine animals, the mapping of the seafloor, and the detection of underwater objects and phenomena. Marine acoustics also plays a crucial role in understanding the impact of human activities, such as shipping, sonar, and offshore energy exploration, on marine ecosystems. **
Who is the Japanese voice actor of Tendou Satori?
The Japanese voice actor of Tendou Satori is Hiroshi Kamiya. He is a well-known voice actor in the anime industry and has voiced many popular characters in various anime series. Hiroshi Kamiya's portrayal of Tendou Satori in the anime "Haikyuu!!" has been praised for capturing the character's unique personality and charisma. **
Similar search terms for SB-Acoustics-Satori-MW19TX
Top-Angebote
Products related to SB-Acoustics-Satori-MW19TX:
-
SB Acoustics Satori WO24TX / TeXtremeThe new SB Acoustics 9.5" Satori WO24TX-4 and WO24TX-8 TExtreme woofers with an increased nominal power of 90 W are an important enhancement to the Satori range, now offering extensive options for speaker designers. SB Acoustics was one of the first manufacturers of speaker chassis to announce the use of TExtreme materials for diaphragms and cones. Although SB Acoustics was not the first manufacturer of diaphragms made from TPCD material, it was likely the brand that contributed the most to the recognition and acceptance of these materials in the market. The fact that SB Acoustics introduced TExtreme-based drivers in its high-end audio series Satori developed by Danesian Audio was a clear sign of the performance that Frank Nielson and Ulrik Schmidt were able to achieve. Features Advanced TExtreme® cone for improved piston operation Large optimized motor system with undercut pole piece and double short-circuit rings Ventilated, aerodynamic aluminum die-cast chassis for optimal strength and low compression. Soft rubber damper with low damping for optimal settling behavior Linear-symmetric suspension for improved dynamic performance Non-conductive glass fiber coil carrier for minimal damping Durable silver conduits installed at a 180° offset for improved stability Ventilated foam piece for reduced compression Low ratio of piston to chassis diameter Sealing and bolt hole projections for reduced coupling to the speaker enclosure Data 4 Ω Variant Subwoofer Series Satori TExtreme Nominal diameter 9.5" Load capacity (QMW) 90 W Impedance (Z) 4 Ω Sensitivity 91 dB Winding coil diameter 49.5 mm Direct current resistance (Re) 3.3 Ω Swinging coil induction (Le) 0.29 mH Resonant frequency (Fs) 26.3 Hz Mechanical Quality (Qms) 5.66 Electrical quality (Qes) 0.37 Total quality (Qts) 0.35 Moving mass (Mms) 42.8 g Suspension compliance (Cms) 0.86 mm/N Membrane area (Sd) 255 cm2 Power factor (BL) 7.9 Tm Equivalent volume (Vas) 79 liters Maximum deflection (Xmax) 8.75 mm Driver's Mechanical Losses (Rms) 1.25 kg/s Total depth 131.4 mm Data 8 Ω Variant Nominal diameter 9.5" Load capacity (QMW) 90 W Impedance (Z) 8 Ω Sensitivity 88 dB Winding coil diameter 49.5 mm Direct current resistance (Re) 5.8 Ω Swinging coil induction (Le) 0.56 mH Resonant frequency (Fs) 24.5 Hz Mechanical Quality (Qms) 5.67 Electrical quality (Qes) 0.36 Total Quality (Qts) 0.34 Moving mass (Mms) 44.2 g Suspension compliance (Cms) 0.95 mm/N Membrane area (Sd) 255 cm2 Power factor (BL) 10.45 Tm Equivalent volume (Vas) 88 liters Maximum deflection (Xmax) 8.55 mm Driver's Mechanical Losses (Rms) 1.2 kg/s Outer diameter 242 mm Total depth 131.4 mm381,51 €*Shipping: 0,00 €Secure redirect to the provider
-
SB Acoustics SW26DBAC76-3-DVThe SW26DBAC76-3-DV from SB Acoustics is a high-performance 10" (25cm) subwoofer designed for both home and car audio applications. This subwoofer features its unique, patented long-throw design and is capable of producing deep bass frequencies. Furthermore, the ventilated aluminum die-cast housing plays a key role in heat dissipation and reducing distortion. Not to be overlooked is the powerful neodymium motor system and the copper voice coil, which further contributes to its durability. A sophisticated item for audio enthusiasts. properties The SW26DBAC76-3-DV is a high-performance subwoofer suitable for both home and car audio applications. It features a long-throw design that allows it to produce deep bass frequencies, while the ventilated aluminum die-cast housing aids in heat dissipation and reduces distortion. Unique patented long-throw design with low depth Ventilated aluminum die-cast chassis for optimal strength and low compression Double rigid aluminum cone structure Non-conductive fiber optic spool carrier for minimal attenuation Short-circuit ring in the motor system for reduced distortions Copper coil for improved load capacity Double oscillating coil Durable insulated silver wires Powerful neodymium motor system SB Acoustics SW26DBAC76-3-DV Flat Subwoofer The SB Acoustics SW26DBAC76-3-DV Shallow Subwoofer is a flat subwoofer with a dual voice coil (2x 3 Ohm) and a 10-inch aluminum cone, along with a ventilated aluminum die-cast chassis. It features a unique, patented flat long-stroke design, a non-conductive fiberglass voice coil former for minimal damping, a short-circuit ring in the motor system for lower distortion, a copper voice coil for improved power handling, and durable, insulated silver cables. The subwoofer has a ventilated aluminum die-cast chassis for optimal strength and low compression. The SW26DBAC76-3-DV is a flat subwoofer that is ideal for applications where space is limited. The subwoofer is designed for a power of 300 W RMS, allowing it to handle even the most demanding audio applications. Additionally, the SW26DBAC76-3-DV has a frequency response of 19 Hz to 250 Hz, enabling it to reproduce a wide range of bass frequencies.311,05 €*Shipping: 0,00 €Secure redirect to the provider
-
SB Acoustics SW26DAC76-3-DVThe model SW26DAC76-3-DV from SB Acoustics is a 10" (25cm) mid-bass driver that stands out particularly due to its special features. A patented, unique, and flat design allows for a wide range and makes the speaker the optimal choice for tight spaces such as home theater systems or car audio systems. The subwoofer offers a dual voice coil for versatile applications with different amplifiers and is characterized by robust materials such as ventilated aluminum die-cast and rigid aluminum, which guarantee strength and stiffness while also supporting heat dissipation. properties Unique, patented, flat design with great range Ventilated aluminum die-cast chassis for optimal strength and low compression Double rigid aluminum membrane Non-conductive fiber optic spool carrier for minimal attenuation Short-circuit ring in the motor system for reduced distortions Copper coil for improved load capacity Double oscillating coil Durable insulated silver wires Powerful neodymium motor system Nominal impedance 2 x 3 Ω Direct current resistance, Re 2 x 2.4 Ω Effective membrane area, Sd 312 cm2 Winding coil diameter 75.5 mm Height of the vibrating coil 30 mm Height of air gap 6 mm Linear coil stroke (p-p) 24 mm Magnetic flux density 1.0 T Weight of the magnet 281 g Net weight 3.43 kg Free air resonance, Fs 19.5 Hz Sensitivity (2.83V/1m) 88/82 dB Mechanical Q-factor, Qms 5.96 Electrical Q-factor, Qes 0.29 Total Q factor, Qts 0.28 Moving mass including air, Mms 185 g Power factor, Bl (par./ser.) 9.7/19.4 Tm Equivalent volume, Vas 49.7 ltr. Compliance, Cms 0.36 mm/N Mechanical loss, Rms 3.8 kg/s Rated load capacity* 300 W311,05 €*Shipping: 0,00 €Secure redirect to the provider
-
Gladen ALPHA 10 SBALPHA 10 SB is a 10-inch (25 cm) enclosed subwoofer from Gladen in a sealed enclosure design with a volume of 22 liters. It features a paper cone, Nomex spider, and steel basket. Impedance is 4 Ω and DC resistance is 2.7 Ω. Power handling is 150 to 250 watts. Chassis diameter is 25 cm and enclosure depth is 34 cm. Features 10-inch enclosed subwoofer Sealed enclosure Volume 22 liters Cone paper Spider Nomex Basket steel Impedance 4 Ω Technical Specifications Power handling 150 watts Power handling 250 watts DC resistance 2.7 Ω Chassis diameter 250 mm Enclosure depth 340 mm171,18 €*Shipping: 0,00 €Secure redirect to the provider
-
What does "staendig sb 2" mean?
"Staendig sb 2" is a German phrase that translates to "constantly someone 2" in English. The term "staendig" means "constant" or "continuous," and "sb" is an abbreviation for "somebody." The number 2 is used to indicate the second person or individual in a sequence or group. Therefore, "staendig sb 2" could be interpreted as referring to someone who is consistently or continuously present or involved in a particular situation or context. **
-
Is SB Tank a brand or independent?
SB Tank is an independent company that specializes in manufacturing and distributing water tanks. It is not a brand associated with any larger corporation or conglomerate. The company operates independently and focuses on providing high-quality water storage solutions to its customers. **
-
What is the meaning of subwoofer in acoustics?
A subwoofer is a type of loudspeaker designed to reproduce low-frequency sound, typically in the range of 20-200 Hz. It is responsible for producing deep bass tones that can be felt as much as heard, adding richness and depth to audio playback. Subwoofers are commonly used in home theater systems, car audio setups, and live music venues to enhance the overall sound quality and create a more immersive listening experience. **
-
What is the difference between acoustics and acoustic?
Acoustics is the scientific study of sound, including its production, transmission, and effects. It encompasses the study of how sound waves behave in different environments and how they interact with various materials. On the other hand, acoustic refers to the properties or qualities of sound, particularly in relation to the way it is produced or transmitted. It is often used to describe the sound characteristics of a space or an instrument, such as acoustic guitar or acoustic insulation. In summary, acoustics is the study of sound, while acoustic refers to the sound itself or its properties. **
What is the difference between optics and acoustics?
Optics is the study of light and its behavior, including how it is generated, transmitted, and detected. It deals with the properties and behavior of light, such as reflection, refraction, and diffraction. Acoustics, on the other hand, is the study of sound and its behavior, including how it is generated, transmitted, and detected. It deals with the properties and behavior of sound waves, such as frequency, amplitude, and resonance. In summary, optics focuses on the properties and behavior of light, while acoustics focuses on the properties and behavior of sound. **
What are the technical specifications of the Technics SB-CS60?
The Technics SB-CS60 is a 3-way, 3-speaker bass reflex system with a maximum input power of 140 watts. It features a 16cm woofer, 6cm midrange, and 2.5cm tweeter, providing a frequency range of 45Hz to 20kHz. The speaker has a nominal impedance of 6 ohms and a sensitivity of 88 dB. It measures 230mm in width, 380mm in height, and 230mm in depth, and weighs 5.5kg. **
Top-Angebote
Products related to SB-Acoustics-Satori-MW19TX:
-
SB Acoustics Satori MW19TX / TeXtremeThe SB Acoustics SATORI MW19TX 8 inch mid-woofer with patented TExtreme diaphragm is available in 4 Ohm and 8 Ohm versions. The ultra-light and extremely stable diaphragm is driven by a powerful neodymium motor. The resonance frequency around 30 Hz lies far outside the usable range, allowing the driver to perform extremely linearly within the usable range and making it ideal for 2-way use or as a woofer. The generously ventilated centering spider optimizes the rear compression behavior to a maximum and provides additional cooling. Features: Advanced TExtreme® cone Ventilated, aerodynamic die-cast aluminum chassis Soft rubber surround with low damping Advanced BIMAX spider Powerful, optimized neodymium motor system with low distortion Extended copper sleeve on the pole shoe Non-conductive fiberglass voice coil former Ventilated pole shoe and voice coil Lightweight CCAW voice coil Durable silver wires Specifications 4 Ohm version: Nominal impedance 4 Ω Frequency range 80Hz - 3.5kHz DC resistance, Re 3.4 Ω Voice coil inductance, Le 0.14 mH Effective diaphragm area, Sd 158 cm2 Voice coil diameter 39 mm Voice coil height 19.6 mm Air gap height 6 mm Linear coil excursion (p-p) 13.6 mm Magnetic flux density 1.1 T Magnet weight 0.15 kg Net weight 1.46 kg Free air resonance, Fs 32 Hz Sensitivity (2.83V/1m) 93 dB Mechanical Q factor, Qms 5.43 Electrical Q factor, Qes 0.28 Total Q factor, Qts 0.27 Moving mass incl. air, Mms 16.2 g Force factor, Bl 6.3 Tm Equivalent volume, Vas 53.2 liters Compliance, Cms 1.52 mm/N Mechanical loss, Rms 0.6 kg/s Nominal power handling* 70 W * IEC 268-5, T/S parameters measured on broken-in drivers. Specifications 8 Ohm version: Nominal impedance 8 Ω Frequency range 80Hz - 3.5kHz DC resistance, Re 6.0 Ω Voice coil inductance, Le 0.20 mH Effective diaphragm area, Sd 158 cm2 Voice coil diameter 39 mm Voice coil height 19.4 mm Air gap height 6 mm Linear coil excursion (p-p) 13.4 mm Magnetic flux density 1.1 T Magnet weight 0.15 kg Net weight 1.46 kg Free air resonance, Fs 33 Hz Sensitivity (2.83V/1m) 90 dB Mechanical Q factor, Qms 6.47 Electrical Q factor, Qes 0.35 Total Q factor, Qts 0.33 Moving mass incl. air, Mms 15.6 g Force factor, Bl 7.5 Tm Equivalent volume, Vas 53.4 liters Compliance, Cms 1.52 mm/N Mechanical loss, Rms 0.5 kg/s Nominal power handling* 70 W * IEC 268-5, T/S parameters measured on broken-in drivers. Dimensions:341,26 €*Shipping: 0,00 €Secure redirect to the provider
-
SB Acoustics Satori MW13TX / TeXtremeThe SB Acoustics SATORI MW13TX 5-inch mid-woofer with patented TExtreme diaphragm is available in 4 Ohm and 8 Ohm versions. The ultra-light and extremely stable diaphragm is driven by a powerful neodymium motor. The resonance frequency around 40 Hz lies far outside the usable range, allowing the driver to perform extremely linearly within the usable range and making it ideal for 2-way use or as a woofer. The generously ventilated centering spider optimizes the rear compression behavior to a maximum and provides additional cooling. Features Advanced TExtreme® cone Ventilated, aerodynamic die-cast aluminum chassis Soft rubber surround with low damping Advanced BIMAX spider Powerful, optimized neodymium motor system with low distortion Extended copper sleeve on the pole shoe Non-conductive fiberglass voice coil former Ventilated pole shoe and voice coil Lightweight CCAW voice coil Durable silver wires Data 4 Ohm version: Nominal impedance 4 Ω Frequency range 60Hz - 5kHz DC resistance, Re 3.8 Ω Voice coil inductance, Le 0.16 mH Effective diaphragm area, Sd 70 cm2 Voice coil diameter 30.5 mm Voice coil height 15 mm Air gap height 5 mm Linear coil excursion (p-p) 10 mm Magnetic flux density 1.08 T Magnet weight 0.1 kg Net weight 0.79 kg Free air resonance, Fs 38 Hz Sensitivity (2.83V/1m) 89 dB Mechanical Q factor, Qms 5.08 Electrical Q factor, Qes 0.27 Total Q factor, Qts 0.26 Moving mass incl. air, Mms 7.4 g Force factor, Bl 5.0 Tm Equivalent volume, Vas 16.0 liters Compliance, Cms 2.38 mm/N Mechanical loss, Rms 0.3 kg/s Nominal power handling* 40 W * IEC 268-5, T/S parameters measured on broken-in drivers. Data 8 Ohm version: Nominal impedance 8 Ω Frequency range 60Hz - 5kHz DC resistance, Re 6.0 Ω Voice coil inductance, Le 0.18 mH Effective diaphragm area, Sd 70 cm2 Voice coil diameter 30.5 mm Voice coil height 15 mm Air gap height 5 mm Linear coil excursion (p-p) 10 mm Magnetic flux density 1.08 T Magnet weight 0.1 kg Net weight 0.79 kg Free air resonance, Fs 40 Hz Sensitivity (2.83V/1m) 87 dB Mechanical Q factor, Qms 4.99 Electrical Q factor, Qes 0.34 Total Q factor, Qts 0.32 Moving mass incl. air, Mms 7.3 g Force factor, Bl 5.7 Tm Equivalent volume, Vas 14.8 liters Compliance, Cms 2.19 mm/N Mechanical loss, Rms 0.4 kg/s Nominal power handling* 40 W * IEC 268-5, T/S parameters measured on broken-in drivers. Dimensions280,85 €*Shipping: 0,00 €Secure redirect to the provider
-
SB Acoustics Satori WO24TX / TeXtremeThe new SB Acoustics 9.5" Satori WO24TX-4 and WO24TX-8 TExtreme woofers with an increased nominal power of 90 W are an important enhancement to the Satori range, now offering extensive options for speaker designers. SB Acoustics was one of the first manufacturers of speaker chassis to announce the use of TExtreme materials for diaphragms and cones. Although SB Acoustics was not the first manufacturer of diaphragms made from TPCD material, it was likely the brand that contributed the most to the recognition and acceptance of these materials in the market. The fact that SB Acoustics introduced TExtreme-based drivers in its high-end audio series Satori developed by Danesian Audio was a clear sign of the performance that Frank Nielson and Ulrik Schmidt were able to achieve. Features Advanced TExtreme® cone for improved piston operation Large optimized motor system with undercut pole piece and double short-circuit rings Ventilated, aerodynamic aluminum die-cast chassis for optimal strength and low compression. Soft rubber damper with low damping for optimal settling behavior Linear-symmetric suspension for improved dynamic performance Non-conductive glass fiber coil carrier for minimal damping Durable silver conduits installed at a 180° offset for improved stability Ventilated foam piece for reduced compression Low ratio of piston to chassis diameter Sealing and bolt hole projections for reduced coupling to the speaker enclosure Data 4 Ω Variant Subwoofer Series Satori TExtreme Nominal diameter 9.5" Load capacity (QMW) 90 W Impedance (Z) 4 Ω Sensitivity 91 dB Winding coil diameter 49.5 mm Direct current resistance (Re) 3.3 Ω Swinging coil induction (Le) 0.29 mH Resonant frequency (Fs) 26.3 Hz Mechanical Quality (Qms) 5.66 Electrical quality (Qes) 0.37 Total quality (Qts) 0.35 Moving mass (Mms) 42.8 g Suspension compliance (Cms) 0.86 mm/N Membrane area (Sd) 255 cm2 Power factor (BL) 7.9 Tm Equivalent volume (Vas) 79 liters Maximum deflection (Xmax) 8.75 mm Driver's Mechanical Losses (Rms) 1.25 kg/s Total depth 131.4 mm Data 8 Ω Variant Nominal diameter 9.5" Load capacity (QMW) 90 W Impedance (Z) 8 Ω Sensitivity 88 dB Winding coil diameter 49.5 mm Direct current resistance (Re) 5.8 Ω Swinging coil induction (Le) 0.56 mH Resonant frequency (Fs) 24.5 Hz Mechanical Quality (Qms) 5.67 Electrical quality (Qes) 0.36 Total Quality (Qts) 0.34 Moving mass (Mms) 44.2 g Suspension compliance (Cms) 0.95 mm/N Membrane area (Sd) 255 cm2 Power factor (BL) 10.45 Tm Equivalent volume (Vas) 88 liters Maximum deflection (Xmax) 8.55 mm Driver's Mechanical Losses (Rms) 1.2 kg/s Outer diameter 242 mm Total depth 131.4 mm381,51 €*Shipping: 0,00 €Secure redirect to the provider
-
SB Acoustics SW26DBAC76-3-DVThe SW26DBAC76-3-DV from SB Acoustics is a high-performance 10" (25cm) subwoofer designed for both home and car audio applications. This subwoofer features its unique, patented long-throw design and is capable of producing deep bass frequencies. Furthermore, the ventilated aluminum die-cast housing plays a key role in heat dissipation and reducing distortion. Not to be overlooked is the powerful neodymium motor system and the copper voice coil, which further contributes to its durability. A sophisticated item for audio enthusiasts. properties The SW26DBAC76-3-DV is a high-performance subwoofer suitable for both home and car audio applications. It features a long-throw design that allows it to produce deep bass frequencies, while the ventilated aluminum die-cast housing aids in heat dissipation and reduces distortion. Unique patented long-throw design with low depth Ventilated aluminum die-cast chassis for optimal strength and low compression Double rigid aluminum cone structure Non-conductive fiber optic spool carrier for minimal attenuation Short-circuit ring in the motor system for reduced distortions Copper coil for improved load capacity Double oscillating coil Durable insulated silver wires Powerful neodymium motor system SB Acoustics SW26DBAC76-3-DV Flat Subwoofer The SB Acoustics SW26DBAC76-3-DV Shallow Subwoofer is a flat subwoofer with a dual voice coil (2x 3 Ohm) and a 10-inch aluminum cone, along with a ventilated aluminum die-cast chassis. It features a unique, patented flat long-stroke design, a non-conductive fiberglass voice coil former for minimal damping, a short-circuit ring in the motor system for lower distortion, a copper voice coil for improved power handling, and durable, insulated silver cables. The subwoofer has a ventilated aluminum die-cast chassis for optimal strength and low compression. The SW26DBAC76-3-DV is a flat subwoofer that is ideal for applications where space is limited. The subwoofer is designed for a power of 300 W RMS, allowing it to handle even the most demanding audio applications. Additionally, the SW26DBAC76-3-DV has a frequency response of 19 Hz to 250 Hz, enabling it to reproduce a wide range of bass frequencies.311,05 €*Shipping: 0,00 €Secure redirect to the provider
-
What is marine acoustics?
Marine acoustics is the study of sound in the ocean and its interaction with marine life, the seafloor, and the water itself. It involves the use of underwater sound to study and monitor marine environments, including the behavior and communication of marine animals, the mapping of the seafloor, and the detection of underwater objects and phenomena. Marine acoustics also plays a crucial role in understanding the impact of human activities, such as shipping, sonar, and offshore energy exploration, on marine ecosystems. **
-
Who is the Japanese voice actor of Tendou Satori?
The Japanese voice actor of Tendou Satori is Hiroshi Kamiya. He is a well-known voice actor in the anime industry and has voiced many popular characters in various anime series. Hiroshi Kamiya's portrayal of Tendou Satori in the anime "Haikyuu!!" has been praised for capturing the character's unique personality and charisma. **
-
What does "staendig sb 2" mean?
"Staendig sb 2" is a German phrase that translates to "constantly someone 2" in English. The term "staendig" means "constant" or "continuous," and "sb" is an abbreviation for "somebody." The number 2 is used to indicate the second person or individual in a sequence or group. Therefore, "staendig sb 2" could be interpreted as referring to someone who is consistently or continuously present or involved in a particular situation or context. **
-
Is SB Tank a brand or independent?
SB Tank is an independent company that specializes in manufacturing and distributing water tanks. It is not a brand associated with any larger corporation or conglomerate. The company operates independently and focuses on providing high-quality water storage solutions to its customers. **
Similar search terms for SB-Acoustics-Satori-MW19TX
-
SB Acoustics SW26DAC76-3-DVThe model SW26DAC76-3-DV from SB Acoustics is a 10" (25cm) mid-bass driver that stands out particularly due to its special features. A patented, unique, and flat design allows for a wide range and makes the speaker the optimal choice for tight spaces such as home theater systems or car audio systems. The subwoofer offers a dual voice coil for versatile applications with different amplifiers and is characterized by robust materials such as ventilated aluminum die-cast and rigid aluminum, which guarantee strength and stiffness while also supporting heat dissipation. properties Unique, patented, flat design with great range Ventilated aluminum die-cast chassis for optimal strength and low compression Double rigid aluminum membrane Non-conductive fiber optic spool carrier for minimal attenuation Short-circuit ring in the motor system for reduced distortions Copper coil for improved load capacity Double oscillating coil Durable insulated silver wires Powerful neodymium motor system Nominal impedance 2 x 3 Ω Direct current resistance, Re 2 x 2.4 Ω Effective membrane area, Sd 312 cm2 Winding coil diameter 75.5 mm Height of the vibrating coil 30 mm Height of air gap 6 mm Linear coil stroke (p-p) 24 mm Magnetic flux density 1.0 T Weight of the magnet 281 g Net weight 3.43 kg Free air resonance, Fs 19.5 Hz Sensitivity (2.83V/1m) 88/82 dB Mechanical Q-factor, Qms 5.96 Electrical Q-factor, Qes 0.29 Total Q factor, Qts 0.28 Moving mass including air, Mms 185 g Power factor, Bl (par./ser.) 9.7/19.4 Tm Equivalent volume, Vas 49.7 ltr. Compliance, Cms 0.36 mm/N Mechanical loss, Rms 3.8 kg/s Rated load capacity* 300 W311,05 €*Shipping: 0,00 €Secure redirect to the provider
-
Gladen ALPHA 10 SBALPHA 10 SB is a 10-inch (25 cm) enclosed subwoofer from Gladen in a sealed enclosure design with a volume of 22 liters. It features a paper cone, Nomex spider, and steel basket. Impedance is 4 Ω and DC resistance is 2.7 Ω. Power handling is 150 to 250 watts. Chassis diameter is 25 cm and enclosure depth is 34 cm. Features 10-inch enclosed subwoofer Sealed enclosure Volume 22 liters Cone paper Spider Nomex Basket steel Impedance 4 Ω Technical Specifications Power handling 150 watts Power handling 250 watts DC resistance 2.7 Ω Chassis diameter 250 mm Enclosure depth 340 mm171,18 €*Shipping: 0,00 €Secure redirect to the provider
-
Gladen RS-X 08 SBThe Gladen RS-X 08 SB is an 8-inch (20 cm) Enclosed Subwoofer in a classic cabinet shape. The closed cabinet has a net volume of 14 liters. The nominal impedance is 4 ohms. The connection is made via a round push terminal. The cabinet measures 32.5 cm in width, 30.5 cm in height, and 20 to 26 cm in depth. The covering is black, and protective braces are included in the delivery. Features 8-inch (20 cm) Enclosed Subwoofer Classic cabinet shape Design: closed Passive Subwoofer Nominal impedance: 4 ohms Power handling: 250 watts Power handling: 375 watts Connection: round push terminal Covering: black Accessories: protective braces Technical Specifications Chassis diameter: 20 cm Cabinet width: 32.5 cm Cabinet height: 30.5 cm Cabinet depth: 20 to 26 cm Net volume: 14 liters238,12 €*Shipping: 0,00 €Secure redirect to the provider
-
Goldwell Topchic Permanent Hair Color coloration cheveux teinte 8 SB 60 mlGoldwell Topchic Permanent Hair Color, 60 ml, Colorations permanentes cheveux pour femme, Envie d’arborer une couleur de cheveux lumineuse et durable, de camoufler vos cheveux blancs ou de changer complètement de teinte ? Quel que soit votre souhait, la coloration permanente Goldwell Topchic Permanent Hair Color vous apportera le résultat escompté. Elle procure aux cheveux une teinte intense et une brillance éclatante. Et contrairement aux colorations semi-permanentes, aux teintures temporaires et aux shampoings colorants qui s’estompent progressivement, votre couleur restera impeccable pendant des semaines. Sa formule infusée de pigments pénètre en profondeur dans les fibres capillaires, confère un effet colorant longue durée, empêche durablement la teinte de se délaver et couvre à merveille les cheveux blancs, par exemple. Que vous souhaitiez uniformiser votre couleur naturelle ou en changer complètement, cette coloration permanente ne vous décevra pas. Le produit : couvre les cheveux gris unifie les couleurs laisse vos cheveux sains et soyeux au toucher Mode d’emploi : Utilisez selon les instructions contenues dans l’emballage.10,92 €*Shipping: 3,45 €Secure redirect to the provider
-
What is the meaning of subwoofer in acoustics?
A subwoofer is a type of loudspeaker designed to reproduce low-frequency sound, typically in the range of 20-200 Hz. It is responsible for producing deep bass tones that can be felt as much as heard, adding richness and depth to audio playback. Subwoofers are commonly used in home theater systems, car audio setups, and live music venues to enhance the overall sound quality and create a more immersive listening experience. **
-
What is the difference between acoustics and acoustic?
Acoustics is the scientific study of sound, including its production, transmission, and effects. It encompasses the study of how sound waves behave in different environments and how they interact with various materials. On the other hand, acoustic refers to the properties or qualities of sound, particularly in relation to the way it is produced or transmitted. It is often used to describe the sound characteristics of a space or an instrument, such as acoustic guitar or acoustic insulation. In summary, acoustics is the study of sound, while acoustic refers to the sound itself or its properties. **
-
What is the difference between optics and acoustics?
Optics is the study of light and its behavior, including how it is generated, transmitted, and detected. It deals with the properties and behavior of light, such as reflection, refraction, and diffraction. Acoustics, on the other hand, is the study of sound and its behavior, including how it is generated, transmitted, and detected. It deals with the properties and behavior of sound waves, such as frequency, amplitude, and resonance. In summary, optics focuses on the properties and behavior of light, while acoustics focuses on the properties and behavior of sound. **
-
What are the technical specifications of the Technics SB-CS60?
The Technics SB-CS60 is a 3-way, 3-speaker bass reflex system with a maximum input power of 140 watts. It features a 16cm woofer, 6cm midrange, and 2.5cm tweeter, providing a frequency range of 45Hz to 20kHz. The speaker has a nominal impedance of 6 ohms and a sensitivity of 88 dB. It measures 230mm in width, 380mm in height, and 230mm in depth, and weighs 5.5kg. **
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.