Buy kopa-houtskooloven.be ?
We are moving the project
kopa-houtskooloven.be .
Are you interested in purchasing the domain
kopa-houtskooloven.be ?
domain@kv-gmbh.de · 0541-91531010
Buy kopa-houtskooloven.be ?
How many per mille does 400 ml of mulled wine have?
To calculate the per mille of 400 ml of mulled wine, we need to know the total volume of the solution. If the total volume of the solution is 1 liter (1000 ml), then the per mille of 400 ml of mulled wine would be 400/1000 = 0.4 per mille. This means that 400 ml of mulled wine makes up 0.4 per mille of the total solution. **
What is the difference between 60 Hertz and 75 Hertz?
The difference between 60 Hertz and 75 Hertz lies in the frequency of the alternating current. Hertz is a unit of frequency, and it measures the number of cycles per second. Therefore, 60 Hertz means the current changes direction 60 times per second, while 75 Hertz means it changes direction 75 times per second. In practical terms, a higher Hertz value can result in a smoother and more responsive display on electronic devices such as monitors and TVs. **
Hertz Mille Legend ML 1650.3
Hertz Mille Legend ML 1650.3 is a 6.5 inch (16.5 cm) midbass speaker with 125 W RMS, 250 W peak power handling, and 4 Ohm impedance. The 36 mm CCAW dual voice coil is mounted on a polyamide former. The drive uses a FEA-optimized neodymium magnet, CNC-machined plates with very low carbon content, and aluminum-coated poles. The cone is made of pressed cellulose membrane with cotton fibers and features exponential V-cone geometry and Boundary Free IIR rubber surround. The three-spoke basket made of aluminum alloy is resonance-free and acoustically transparent, with integrated ventilation holes, complemented by a CNC-machined diamond-cut basket edge with the Hertz logo and a factory-cast aluminum grille with a diamond-cut Hertz logo. The frequency response ranges from 40 Hz to 6.5 kHz, Xmech is ±9 mm, the magnet size is 80 x 45 x 5 mm, and the weight is 1.29 kg. Features 6.5 inch (16.5 cm) midbass speaker RMS power 125 W Peak power 250 W Impedance 4 Ohm Voice coil 36 mm (CCAW, dual, polyamide former) Frequency response 40 Hz – 6.5 kHz Xmech ±9 mm Magnet neodymium Magnet size 80 x 45 x 5 mm Cone Pressed cellulose membrane with cotton fibers Exponential V-cone with optimized geometry Boundary Free IIR rubber surround CNC-machined plates with very low carbon content Aluminum-coated poles Three-spoke, acoustically transparent, resonance-free aluminum alloy basket with ventilation holes CNC-machined, diamond-cut basket edge with Hertz logo Factory-cast aluminum grille with diamond-cut Hertz logo Weight 1.29 kg Technical Specifications Size 165 mm Re 3.3 Ohm Fs 65 Hz Le 0.24 mH Vas 8.3 l Mms 17.5 g Cms 0.3 mm/N BL 7 Tm Qts 0.52 Qes 0.52 Qms 5.3 Sound pressure 93 dB A 165 mm B 141 mm C 80 mm D 69 mm E 170 mm F 26 mm D 132 mm
329,77 €*
Shipping: 0,00 €
Secure redirect to the provider
Hertz Mille Legend ML 1800.3
Hertz Mille Legend ML 1800.3 as a 6.5 inch (16.5 cm) midbass driver with a size of 180 mm and 4 Ohm impedance. The power handling is 200 W RMS and 400 W peak power, the frequency response is 38–6000 Hz, and the sound pressure level is 93 dB. Equipped with a 50 mm CCAW dual voice coil on polyamide former, FEA-optimized neodymium magnet, and aluminum-coated poles. The diaphragm consists of pressed pulp with cotton fibers, combined with Boundary Free IIR rubber surround and exponential V-cone geometry. The three-spoke basket made of resonance-optimized aluminum alloy is acoustically transparent and ventilated. CNC-milled plates with very low carbon content, diamond-cut basket rim with Hertz logo, and factory-cast aluminum grill. Xmech is ±10 mm, weight is 1.71 kg, and magnet size is 90 x 60.7 x 5 mm. Features 6.5 inch (16.5 cm) midbass driver Neodymium magnet, FEA-optimized CNC-milled plates with very low carbon content Aluminum-coated poles 50 mm CCAW dual voice coil on polyamide former Exponential V-cone with optimized geometry Boundary Free IIR rubber surround Pressed pulp diaphragm with cotton fibers Three-spoke, resonance-optimized aluminum alloy basket with ventilation holes CNC-milled, diamond-cut basket rim with Hertz logo Factory-cast aluminum grill with diamond-cut Hertz logo Technical specifications Size: 180 mm Impedance: 4 Ohm RMS power: 200 W Peak power: 400 W Frequency response: 38–6000 Hz SPL: 93 dB Voice coil: Ø 50 mm Magnet size: 90 x 60.7 x 5 mm Magnet material: Neodymium Diaphragm: Pressed pulp diaphragm with cotton fibers Xmech: ±10 mm Weight: 1.71 kg A: 184 mm B: 160 mm C: 88 mm D: 76 mm E: 189.2 mm F: 27 mm D: 149 mm Re: 3.2 Ohm Fs: 60 Hz Le: 0.35 mH Vas: 12.2 l Mms: 27.5 g Cms: 0.3 mm/N BL: 7.8 T·m Qts: 0.5 Qes: 0.53 Qms: 7.22
438,30 €*
Shipping: 0,00 €
Secure redirect to the provider
Similar search terms for Hertz-Mille-Legend-ML
Top-Angebote
Products related to Hertz-Mille-Legend-ML:
-
Hertz Mille Legend ML 700.3The Hertz Mille Legend ML 700.3 is a 3-inch (8 cm) midrange driver with 4 ohms, neodymium magnet, and a pressed cellulose membrane with cotton fibers. The exponential V-cone with optimized geometry, the single-layer voice coil, and the pole piece coated with extremely pure copper are at the center of the design. CNC-machined plates with very low carbon content, along with the Boundary Free IIR rubber surround and the CONEX spider, complete the construction. The three-spoke, resonance-damped basket made of aluminum alloy features integrated ventilation holes, along with a diamond-cut basket edge and a factory-cast aluminum grille with the Hertz logo. The frequency response ranges from 200 to 20,000 Hz, the resonance frequency is 110 Hz, and the sensitivity is 90 dB. The voice coil measures 20 mm, the magnet size is 45 x 25 x 3.5 mm, and the weight is 0.21 kg. The nominal dimensions include a size of 70 mm as well as A 87.8 mm, B 74 mm, C 47 mm, D 41.3 mm, E 93 mm, and F 17 mm. The power handling is 100 W peak, referenced to a high-pass of 250 Hz at 12 dB/octave. Features 3-inch (8 cm) midrange driver Neodymium magnet, FEA-optimized CNC-machined plates with very low carbon content Pole piece coated with extremely pure copper, single-layer voice coil Exponential V-cone with optimized geometry CONEX spider with optimized profile Boundary Free IIR rubber surround Pressed cellulose membrane with cotton fibers Optimized geometry at the cone joint (FEA) Three-spoke, resonance-damped basket made of aluminum alloy with integrated ventilation holes Diamond-cut basket edge with Hertz logo Factory-cast aluminum grille with diamond-cut Hertz logo Technical Specifications Size 70 mm Impedance 4 ohms Frequency response 200–20,000 Hz Resonance frequency Fs 110 Hz Sensitivity 90 dB Power handling peak 100 W Peak specification at high-pass 250 Hz, 12 dB/octave Voice coil Ø 20 mm Magnet size 45 x 25 x 3.5 mm Weight 0.21 kg Effective diameter 65 mm DC resistance Re 3.8 ohms Inductance Le 0.05 mH Equivalent volume Vas 1.1 l Moving mass Mms 2.7 g Compliance Cms 0.7 mm/N Force factor BL 3.3 Tm Q factor Qts 0.57 Q factor Qes 0.67 Q factor Qms 4 Dimension A 87.8 mm Dimension B 74 mm Dimension C 47 mm Dimension D 41.3 mm Dimension E 93 mm Dimension F 17 mm214,21 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz Mille Legend ML 280.3Hertz Mille Legend ML 280.3 is a Dome Tweeter with a Tetolon dome, neodymium magnet, and FEA-optimized geometry. The voice coil measures 28 mm, the size is 35 mm, and the impedance is 4 Ohms. The frequency response ranges from 1000 to 28000 Hz, the Fs value is 900 Hz, and the sound pressure level is 92 dB. An aluminum die-cast front plate with FEA-optimized profile and a solid aluminum CNC-machined frame structure with a rear loading chamber are integrated. An extremely pure copper short-circuit ring complements the high-frequency extension. The rear acoustic chamber is designed for Fs 900 Hz and uses high-density damping material under the dome as well as low-density absorbing material in the rear chamber. The magnet size is 27.8 x 3.5 x 3 mm, the weight is 0.10 kg, and the peak power handling is 180 W. Features Dome Tweeter Tetolon dome, FEA-optimized geometry Neodymium magnet, FEA-optimized magnetic flux Extremely pure copper short-circuit ring Aluminum die-cast front plate with FEA-optimized profile Frame structure and rear loading chamber made of CNC-machined solid aluminum Rear chamber designed for Fs 900 Hz High-density damping material under the dome; low-density absorbing material in the rear chamber Size 35 mm Weight 0.10 kg Technical Specifications Impedance 4 Ohms Voice coil Ø 28 mm Frequency response 1000–28000 Hz Peak power handling 180 W Hi-pass filtering at 1.8 kHz, 12 dB/Oct. Note on peak power handling Magnet size W x D x H 27.8 x 3.5 x 3 mm Fs 900 Hz Spl 92 dB Re 3.3 Ohms Le 0.013 mH Mms 0.4 g Cms 0.09 mm/N BL 1.9 Tm Qts 1.3 Qes 1.9 Qms 4 A 53.4 mm B 48 mm C 29 mm D 13.5 mm D 28 mm198,72 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz Mille Legend ML 2000.3The Hertz Mille Legend ML 2000.3 is an 8-inch Subwoofer with a diameter of 200 mm, designed for 700 W RMS and 1400 W peak power at 4 Ohms. A 100 mm CCAW voice coil, wound In/Out on a TIL former, along with a neodymium magnet measuring 95 x 28 x 5 mm, forms the drive. The frequency response ranges from 30–600 Hz, the linear excursion Xmax is 13 mm, and the mechanical excursion Xmech is ±23 mm. The diaphragm is made of pressed paper with mineral powders, complemented by exponential V-cone geometry and Boundary Free IIR rubber surround. The basket is made from an aluminum alloy with integrated ventilation holes and a CNC-machined, diamond-cut basket edge featuring the Hertz logo; the magnetic circuit uses CNC-machined low-carbon plates and an aluminum shorting ring at the pole. Electroacoustic parameters: D 165 mm, Re 2.7 Ohm, Fs 40 Hz, Le 0.72 mH, Vas 9.5 l, Mms 110 g, Cms 0.15 mm/N, BL 11 T*m, Qts 0.56, Qes 0.63, Qms 5, sound pressure 86 dB. Physical dimensions: A 217 mm, B 138 mm, C 138 mm, D 117 mm, E 223 mm, F 46 mm, weight 6.120 kg. For sealed enclosures, 10 to 17 liters are recommended. Features 8-inch Subwoofer Diameter 200 mm RMS power 700 W Peak power 1400 W Impedance 4 Ohm Frequency response 30–600 Hz Voice coil 100 mm, CCAW, wound In/Out, TIL former Neodymium magnet, FEA-optimized Pole with aluminum shorting ring Boundary Free IIR rubber surround Exponential V-cone geometry Diaphragm made of pressed paper with mineral powders Basket made of aluminum alloy with integrated ventilation holes CNC-machined, diamond-cut basket edge with Hertz logo Optimized for sealed enclosures 10–17 liters Xmax 13 mm Xmech ±23 mm Weight 6.120 kg Technical Specifications Effective diaphragm diameter D 165 mm Re 2.7 Ohm Fs 40 Hz Le 0.72 mH Vas 9.5 liters Mms 110 g Cms 0.15 mm/N BL 11 T*m Qts 0.56 Qes 0.63 Qms 5 Sound pressure 86 dB Magnet size 95 x 28 x 5 mm Dimension A 217 mm Dimension B 138 mm Dimension C 138 mm Dimension D 117 mm Dimension E 223 mm Dimension F 46 mm Sealed enclosure compact: Volume 10 liters Enclosure data sealed: Volume 17 liters; Fb 50 Hz; Qtc 0.85; B 450 mm; H 350 mm; T 190 mm; Cutout diameter 236 mm; Wood thickness 19 mm Enclosure data sealed power: Volume 17 liters; Fb 50 Hz; Qtc 0.70; B 350 mm; H 300 mm; T 250 mm; Mounting hole 186 mm; Wood thickness 19 mm507,85 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz Mille Legend ML 2500.3Hertz Mille Legend ML 2500.3 is a 10 inch (25 cm) Subwoofer with 4 Ohm. The RMS power is 700 W. The peak power is 1400 W. The frequency response is 27–500 Hz. A 100 mm CCAW voice coil on TIL former, inner magnet design, aluminum shorting ring, and CNC-milled sheets with low carbon content as well as FEA-optimized magnetic circuit are part of the construction. The neodymium magnet measures 95 x 28 x 6 mm, the basket is made of an aluminum alloy with integrated ventilation holes and six-spoke structure, the surround is a Boundary Free IIR rubber surround. The cone is made of pressed pulp with mineral powders, the geometry is exponential V-cone, Xmax is 17 mm, Xmech ±27 mm, the weight is 7.5 kg. Electroacoustic parameters: Re 2.75 Ohm, Fs 33 Hz, Le 1.05 mH, Vas 23.5 l, Mms 175 g, Cms 0.125 mm/N, BL 12.6 T m, Qts 0.63, Qes 0.65, Qms 7.5, SPL 88 dB. Optimized for closed enclosures with a volume of 17–25 liters. Features 10 inch (25 cm) Subwoofer Manufacturer: Hertz Impedance 4 Ohm RMS power 700 W Peak power 1400 W Frequency response 27–500 Hz Neodymium magnet Magnet size 95 x 28 x 6 mm CCAW voice coil Ø 100 mm Voice coil In/Out wound TIL former Voice coil with inner magnet Aluminum shorting ring at the pole IIR rubber surround Boundary Free Exponential V-cone geometry Paper membrane with mineral powders Basket made of aluminum alloy with integrated ventilation holes and six spokes CNC-milled sheets with low carbon content Diamond-cut basket edge with Hertz logo Ergonomically compact design Optimized for closed enclosures 17–25 liters Xmax 17 mm Xmech ±27 mm Weight 7.5 kg Technical data Size 250 mm Impedance 4 Ohm RMS power 700 W Peak power 1400 W Frequency response 27–500 Hz Voice coil Ø 100 mm Re 2.75 Ohm Fs 33 Hz Le 1.05 mH Vas 23.5 l Mms 175 g Cms 0.125 mm/N BL 12.6 T m Qts 0.63 Qes 0.65 Qms 7.5 SPL 88 dB Xmax 17 mm Xmech ±27 mm Magnet neodymium Magnet size 95 x 28 x 6 mm Weight 7.5 kg Cone pressed pulp cone with mineral powders Physical dimensions A 268 mm Physical dimensions B 234 mm Physical dimensions C 159 mm Physical dimensions D 137 mm Physical dimensions E 274 mm Physical dimensions F 50 mm D 212.5 mm Enclosure closed compact volume 17 l Enclosure closed compact Fb 49 Hz Enclosure closed compact Qtc 0.89 Enclosure closed compact B 350 mm Enclosure closed compact H 300 mm Enclosure closed compact T 250 mm Enclosure closed compact mounting hole 235 mm Enclosure closed compact wood thickness 19 mm Sheet cut closed compact A 350 x 300 mm quantity 2 Sheet cut closed compact B 350 x 212 mm quantity 2 Sheet cut closed compact C 262 x 212 mm quantity 2 Enclosure closed power volume 25 l Enclosure closed power Fb 42.5 Hz Enclosure closed power Qtc 0.80 Enclosure closed power B 400 mm Enclosure closed power H 350 mm Enclosure closed power T 260 mm Enclosure closed power mounting hole 235 mm Enclosure closed power wood thickness 19 mm Sheet cut closed power A 400 x 350 mm quantity 2 Sheet cut closed power B 400 x 222 mm quantity 2 Sheet cut closed...563,26 €*Shipping: 0,00 €Secure redirect to the provider
-
Why does 50 ml plus 50 ml not equal 100 ml?
When you mix 50 ml of a substance with another 50 ml of the same substance, the molecules of the two substances occupy the same space, leading to a slight increase in volume due to the spaces between the molecules. This phenomenon is known as the "packing effect" or "intermolecular space," which causes the total volume to be slightly more than 100 ml. Therefore, 50 ml plus 50 ml does not equal exactly 100 ml due to this increase in volume caused by the packing effect. **
-
What are per mille points?
Per mille points, also known as parts per thousand, are a way of expressing a ratio or proportion in relation to a total of one thousand. It is often used to measure the concentration of a substance in a solution, such as the alcohol content in beverages. For example, if a beverage has an alcohol content of 5 per mille, it means that there are 5 parts of alcohol for every 1000 parts of the total solution. Per mille points are commonly denoted by the symbol ‰. **
-
Does the 165 Hertz monitor only go up to 100 Hertz?
No, a 165 Hertz monitor does not only go up to 100 Hertz. A 165 Hertz monitor is capable of displaying refresh rates up to 165 Hertz, providing smoother and more responsive visuals compared to lower refresh rate monitors. Users can adjust the monitor settings to select the desired refresh rate, up to the maximum of 165 Hertz. **
-
Which cable, 60 Hertz or 144 Hertz, is the best for gaming?
The 144 Hertz cable is generally considered the best for gaming. This is because it offers a higher refresh rate, allowing for smoother and more responsive gameplay. The higher refresh rate of 144 Hertz can provide a competitive edge in fast-paced games, as it reduces motion blur and input lag. Overall, the 144 Hertz cable is preferred by many gamers for its superior performance in gaming scenarios. **
Hertz Mille Legend MLK 1650.3
Hertz Mille Legend MLK 1650.3 is a 6.5 inch (16.5 cm) Speaker Set as a 2-way system with a passive Crossover. The MLCX 2 TW.3 Crossover enables a bi-amping system and offers a contour controller for the woofer and tweeter crossover frequency. The Crossover cut-off points are at 2.5 kHz (Mid/Hi-Cont. ON) and 3.5 kHz (Mid/Hi-Cont. OFF). It is specified with 150 W RMS and 300 W peak power, as well as 4 Ohm impedance. The frequency response is rated at 40 - 25,000 Hz, with a sensitivity of 92 dB SPL. The woofer has a 36 mm voice coil, the tweeter has a 28 mm voice coil and a 35 mm tweeter diaphragm. Weights: Woofer 1.29 kg, Tweeter 0.10 kg, Crossover 0.57 kg. Features 6.5 inch (16.5 cm) Speaker Set 2-way system with passive Crossover MLCX 2 TW.3 Bi-amping feasible (dual amplifier system) Contour controller for woofer and tweeter crossover frequency RMS power 150 W Peak power 300 W Impedance 4 Ohm Sensitivity 92 dB SPL Frequency response 40 - 25,000 Hz Crossover cut-off 2.5 kHz (Mid/Hi-Cont. ON), 3.5 kHz (Mid/Hi-Cont. OFF) Tweeter diaphragm 35 mm Tweeter voice coil 28 mm Woofer voice coil 36 mm Technical Specifications Size 165 mm Crossover type 2-way passive crossover Weight Woofer 1.29 kg Weight Tweeter 0.10 kg Weight Crossover 0.57 kg D 132 mm Re 3.3 Ohm Fs 65 Hz Le 0.24 mH Vas 8.3 l Mms 17.5 g Cms 0.3 mm/N BL 7 T*m Qts 0.47 Qes 0.52 Qms 5.3 Spl 93 dB
614,46 €*
Shipping: 0,00 €
Secure redirect to the provider
Hertz Mille Legend MLK 165.3
Hertz Mille Legend MLK 165.3 as a 6.5 inch (16.5 cm) Speaker Set with ML 28.3 Legend Tweeter, ML 165.3 Legend Woofer, and MLCX 165.3 Crossover. Boundary Free surround, V-Cone cone made of pressed paper membrane reinforced with cotton fibers, and six-spoke aluminum basket. Driven by a high-density ferrite magnet. Power handling 150 W RMS and 300 W peak value at 4 Ohm impedance. Frequency response 40 to 25 kHz and sensitivity 91 dB SPL. Woofer voice coil 36 mm, Tweeter voice coil 28 mm, Tweeter diaphragm 35 mm. 2-way passive Crossover with 3.5 kHz crossover frequency and 12 dB/Oct. Features 6.5 inch (16.5 cm) Speaker Set Included: ML 28.3 Legend Tweeter, ML 165.3 Legend Woofer, MLCX 165.3 Crossover Size 165 mm Impedance 4 Ohm Power handling RMS 150 W Power handling peak value 300 W Frequency response 40 – 25 kHz Sensitivity 91 dB SPL 2-way passive Crossover Crossover frequency 3.5 kHz, 12 dB/Oct Boundary Free surround V-Cone cone made of pressed paper membrane reinforced with cotton fibers Six-spoke aluminum basket High-density ferrite magnet Tweeter diaphragm 35 mm Woofer voice coil Ø 36 mm Tweeter voice coil Ø 28 mm Weight Woofer 1.65 kg Weight Tweeter 0.075 kg Weight Crossover 0.37 kg Technical specifications Effective diameter D 132 mm Re 3.3 Ohm Fs 65 Hz Le 0.37 mH Vas 9 l Mms 17 g Cms 0.3 mm/N BL 6 T*m Qts 0.57 Qes 0.64 Qms 5.4 SPL 92 dB
353,73 €*
Shipping: 0,00 €
Secure redirect to the provider
'How many per mille are after...?'
I'm sorry, but I need more context or specific information to provide an accurate answer. Please provide more details or clarify your question so I can assist you better. **
Is 13 per mille a lot?
Thirteen per mille is equivalent to 1.3%, so it is not a large percentage. However, whether it is considered a lot depends on the context. In terms of interest rates or inflation, 13 per mille would be considered low. However, in terms of mortality rates or failure rates, 13 per mille could be considered high. Therefore, whether 13 per mille is a lot or not depends on the specific situation being considered. **
Top-Angebote
Products related to Hertz-Mille-Legend-ML:
-
Hertz Mille Legend ML 1650.3Hertz Mille Legend ML 1650.3 is a 6.5 inch (16.5 cm) midbass speaker with 125 W RMS, 250 W peak power handling, and 4 Ohm impedance. The 36 mm CCAW dual voice coil is mounted on a polyamide former. The drive uses a FEA-optimized neodymium magnet, CNC-machined plates with very low carbon content, and aluminum-coated poles. The cone is made of pressed cellulose membrane with cotton fibers and features exponential V-cone geometry and Boundary Free IIR rubber surround. The three-spoke basket made of aluminum alloy is resonance-free and acoustically transparent, with integrated ventilation holes, complemented by a CNC-machined diamond-cut basket edge with the Hertz logo and a factory-cast aluminum grille with a diamond-cut Hertz logo. The frequency response ranges from 40 Hz to 6.5 kHz, Xmech is ±9 mm, the magnet size is 80 x 45 x 5 mm, and the weight is 1.29 kg. Features 6.5 inch (16.5 cm) midbass speaker RMS power 125 W Peak power 250 W Impedance 4 Ohm Voice coil 36 mm (CCAW, dual, polyamide former) Frequency response 40 Hz – 6.5 kHz Xmech ±9 mm Magnet neodymium Magnet size 80 x 45 x 5 mm Cone Pressed cellulose membrane with cotton fibers Exponential V-cone with optimized geometry Boundary Free IIR rubber surround CNC-machined plates with very low carbon content Aluminum-coated poles Three-spoke, acoustically transparent, resonance-free aluminum alloy basket with ventilation holes CNC-machined, diamond-cut basket edge with Hertz logo Factory-cast aluminum grille with diamond-cut Hertz logo Weight 1.29 kg Technical Specifications Size 165 mm Re 3.3 Ohm Fs 65 Hz Le 0.24 mH Vas 8.3 l Mms 17.5 g Cms 0.3 mm/N BL 7 Tm Qts 0.52 Qes 0.52 Qms 5.3 Sound pressure 93 dB A 165 mm B 141 mm C 80 mm D 69 mm E 170 mm F 26 mm D 132 mm329,77 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz Mille Legend ML 1800.3Hertz Mille Legend ML 1800.3 as a 6.5 inch (16.5 cm) midbass driver with a size of 180 mm and 4 Ohm impedance. The power handling is 200 W RMS and 400 W peak power, the frequency response is 38–6000 Hz, and the sound pressure level is 93 dB. Equipped with a 50 mm CCAW dual voice coil on polyamide former, FEA-optimized neodymium magnet, and aluminum-coated poles. The diaphragm consists of pressed pulp with cotton fibers, combined with Boundary Free IIR rubber surround and exponential V-cone geometry. The three-spoke basket made of resonance-optimized aluminum alloy is acoustically transparent and ventilated. CNC-milled plates with very low carbon content, diamond-cut basket rim with Hertz logo, and factory-cast aluminum grill. Xmech is ±10 mm, weight is 1.71 kg, and magnet size is 90 x 60.7 x 5 mm. Features 6.5 inch (16.5 cm) midbass driver Neodymium magnet, FEA-optimized CNC-milled plates with very low carbon content Aluminum-coated poles 50 mm CCAW dual voice coil on polyamide former Exponential V-cone with optimized geometry Boundary Free IIR rubber surround Pressed pulp diaphragm with cotton fibers Three-spoke, resonance-optimized aluminum alloy basket with ventilation holes CNC-milled, diamond-cut basket rim with Hertz logo Factory-cast aluminum grill with diamond-cut Hertz logo Technical specifications Size: 180 mm Impedance: 4 Ohm RMS power: 200 W Peak power: 400 W Frequency response: 38–6000 Hz SPL: 93 dB Voice coil: Ø 50 mm Magnet size: 90 x 60.7 x 5 mm Magnet material: Neodymium Diaphragm: Pressed pulp diaphragm with cotton fibers Xmech: ±10 mm Weight: 1.71 kg A: 184 mm B: 160 mm C: 88 mm D: 76 mm E: 189.2 mm F: 27 mm D: 149 mm Re: 3.2 Ohm Fs: 60 Hz Le: 0.35 mH Vas: 12.2 l Mms: 27.5 g Cms: 0.3 mm/N BL: 7.8 T·m Qts: 0.5 Qes: 0.53 Qms: 7.22438,30 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz Mille Legend ML 700.3The Hertz Mille Legend ML 700.3 is a 3-inch (8 cm) midrange driver with 4 ohms, neodymium magnet, and a pressed cellulose membrane with cotton fibers. The exponential V-cone with optimized geometry, the single-layer voice coil, and the pole piece coated with extremely pure copper are at the center of the design. CNC-machined plates with very low carbon content, along with the Boundary Free IIR rubber surround and the CONEX spider, complete the construction. The three-spoke, resonance-damped basket made of aluminum alloy features integrated ventilation holes, along with a diamond-cut basket edge and a factory-cast aluminum grille with the Hertz logo. The frequency response ranges from 200 to 20,000 Hz, the resonance frequency is 110 Hz, and the sensitivity is 90 dB. The voice coil measures 20 mm, the magnet size is 45 x 25 x 3.5 mm, and the weight is 0.21 kg. The nominal dimensions include a size of 70 mm as well as A 87.8 mm, B 74 mm, C 47 mm, D 41.3 mm, E 93 mm, and F 17 mm. The power handling is 100 W peak, referenced to a high-pass of 250 Hz at 12 dB/octave. Features 3-inch (8 cm) midrange driver Neodymium magnet, FEA-optimized CNC-machined plates with very low carbon content Pole piece coated with extremely pure copper, single-layer voice coil Exponential V-cone with optimized geometry CONEX spider with optimized profile Boundary Free IIR rubber surround Pressed cellulose membrane with cotton fibers Optimized geometry at the cone joint (FEA) Three-spoke, resonance-damped basket made of aluminum alloy with integrated ventilation holes Diamond-cut basket edge with Hertz logo Factory-cast aluminum grille with diamond-cut Hertz logo Technical Specifications Size 70 mm Impedance 4 ohms Frequency response 200–20,000 Hz Resonance frequency Fs 110 Hz Sensitivity 90 dB Power handling peak 100 W Peak specification at high-pass 250 Hz, 12 dB/octave Voice coil Ø 20 mm Magnet size 45 x 25 x 3.5 mm Weight 0.21 kg Effective diameter 65 mm DC resistance Re 3.8 ohms Inductance Le 0.05 mH Equivalent volume Vas 1.1 l Moving mass Mms 2.7 g Compliance Cms 0.7 mm/N Force factor BL 3.3 Tm Q factor Qts 0.57 Q factor Qes 0.67 Q factor Qms 4 Dimension A 87.8 mm Dimension B 74 mm Dimension C 47 mm Dimension D 41.3 mm Dimension E 93 mm Dimension F 17 mm214,21 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz Mille Legend ML 280.3Hertz Mille Legend ML 280.3 is a Dome Tweeter with a Tetolon dome, neodymium magnet, and FEA-optimized geometry. The voice coil measures 28 mm, the size is 35 mm, and the impedance is 4 Ohms. The frequency response ranges from 1000 to 28000 Hz, the Fs value is 900 Hz, and the sound pressure level is 92 dB. An aluminum die-cast front plate with FEA-optimized profile and a solid aluminum CNC-machined frame structure with a rear loading chamber are integrated. An extremely pure copper short-circuit ring complements the high-frequency extension. The rear acoustic chamber is designed for Fs 900 Hz and uses high-density damping material under the dome as well as low-density absorbing material in the rear chamber. The magnet size is 27.8 x 3.5 x 3 mm, the weight is 0.10 kg, and the peak power handling is 180 W. Features Dome Tweeter Tetolon dome, FEA-optimized geometry Neodymium magnet, FEA-optimized magnetic flux Extremely pure copper short-circuit ring Aluminum die-cast front plate with FEA-optimized profile Frame structure and rear loading chamber made of CNC-machined solid aluminum Rear chamber designed for Fs 900 Hz High-density damping material under the dome; low-density absorbing material in the rear chamber Size 35 mm Weight 0.10 kg Technical Specifications Impedance 4 Ohms Voice coil Ø 28 mm Frequency response 1000–28000 Hz Peak power handling 180 W Hi-pass filtering at 1.8 kHz, 12 dB/Oct. Note on peak power handling Magnet size W x D x H 27.8 x 3.5 x 3 mm Fs 900 Hz Spl 92 dB Re 3.3 Ohms Le 0.013 mH Mms 0.4 g Cms 0.09 mm/N BL 1.9 Tm Qts 1.3 Qes 1.9 Qms 4 A 53.4 mm B 48 mm C 29 mm D 13.5 mm D 28 mm198,72 €*Shipping: 0,00 €Secure redirect to the provider
-
How many per mille does 400 ml of mulled wine have?
To calculate the per mille of 400 ml of mulled wine, we need to know the total volume of the solution. If the total volume of the solution is 1 liter (1000 ml), then the per mille of 400 ml of mulled wine would be 400/1000 = 0.4 per mille. This means that 400 ml of mulled wine makes up 0.4 per mille of the total solution. **
-
What is the difference between 60 Hertz and 75 Hertz?
The difference between 60 Hertz and 75 Hertz lies in the frequency of the alternating current. Hertz is a unit of frequency, and it measures the number of cycles per second. Therefore, 60 Hertz means the current changes direction 60 times per second, while 75 Hertz means it changes direction 75 times per second. In practical terms, a higher Hertz value can result in a smoother and more responsive display on electronic devices such as monitors and TVs. **
-
Why does 50 ml plus 50 ml not equal 100 ml?
When you mix 50 ml of a substance with another 50 ml of the same substance, the molecules of the two substances occupy the same space, leading to a slight increase in volume due to the spaces between the molecules. This phenomenon is known as the "packing effect" or "intermolecular space," which causes the total volume to be slightly more than 100 ml. Therefore, 50 ml plus 50 ml does not equal exactly 100 ml due to this increase in volume caused by the packing effect. **
-
What are per mille points?
Per mille points, also known as parts per thousand, are a way of expressing a ratio or proportion in relation to a total of one thousand. It is often used to measure the concentration of a substance in a solution, such as the alcohol content in beverages. For example, if a beverage has an alcohol content of 5 per mille, it means that there are 5 parts of alcohol for every 1000 parts of the total solution. Per mille points are commonly denoted by the symbol ‰. **
Similar search terms for Hertz-Mille-Legend-ML
-
Hertz Mille Legend ML 2000.3The Hertz Mille Legend ML 2000.3 is an 8-inch Subwoofer with a diameter of 200 mm, designed for 700 W RMS and 1400 W peak power at 4 Ohms. A 100 mm CCAW voice coil, wound In/Out on a TIL former, along with a neodymium magnet measuring 95 x 28 x 5 mm, forms the drive. The frequency response ranges from 30–600 Hz, the linear excursion Xmax is 13 mm, and the mechanical excursion Xmech is ±23 mm. The diaphragm is made of pressed paper with mineral powders, complemented by exponential V-cone geometry and Boundary Free IIR rubber surround. The basket is made from an aluminum alloy with integrated ventilation holes and a CNC-machined, diamond-cut basket edge featuring the Hertz logo; the magnetic circuit uses CNC-machined low-carbon plates and an aluminum shorting ring at the pole. Electroacoustic parameters: D 165 mm, Re 2.7 Ohm, Fs 40 Hz, Le 0.72 mH, Vas 9.5 l, Mms 110 g, Cms 0.15 mm/N, BL 11 T*m, Qts 0.56, Qes 0.63, Qms 5, sound pressure 86 dB. Physical dimensions: A 217 mm, B 138 mm, C 138 mm, D 117 mm, E 223 mm, F 46 mm, weight 6.120 kg. For sealed enclosures, 10 to 17 liters are recommended. Features 8-inch Subwoofer Diameter 200 mm RMS power 700 W Peak power 1400 W Impedance 4 Ohm Frequency response 30–600 Hz Voice coil 100 mm, CCAW, wound In/Out, TIL former Neodymium magnet, FEA-optimized Pole with aluminum shorting ring Boundary Free IIR rubber surround Exponential V-cone geometry Diaphragm made of pressed paper with mineral powders Basket made of aluminum alloy with integrated ventilation holes CNC-machined, diamond-cut basket edge with Hertz logo Optimized for sealed enclosures 10–17 liters Xmax 13 mm Xmech ±23 mm Weight 6.120 kg Technical Specifications Effective diaphragm diameter D 165 mm Re 2.7 Ohm Fs 40 Hz Le 0.72 mH Vas 9.5 liters Mms 110 g Cms 0.15 mm/N BL 11 T*m Qts 0.56 Qes 0.63 Qms 5 Sound pressure 86 dB Magnet size 95 x 28 x 5 mm Dimension A 217 mm Dimension B 138 mm Dimension C 138 mm Dimension D 117 mm Dimension E 223 mm Dimension F 46 mm Sealed enclosure compact: Volume 10 liters Enclosure data sealed: Volume 17 liters; Fb 50 Hz; Qtc 0.85; B 450 mm; H 350 mm; T 190 mm; Cutout diameter 236 mm; Wood thickness 19 mm Enclosure data sealed power: Volume 17 liters; Fb 50 Hz; Qtc 0.70; B 350 mm; H 300 mm; T 250 mm; Mounting hole 186 mm; Wood thickness 19 mm507,85 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz Mille Legend ML 2500.3Hertz Mille Legend ML 2500.3 is a 10 inch (25 cm) Subwoofer with 4 Ohm. The RMS power is 700 W. The peak power is 1400 W. The frequency response is 27–500 Hz. A 100 mm CCAW voice coil on TIL former, inner magnet design, aluminum shorting ring, and CNC-milled sheets with low carbon content as well as FEA-optimized magnetic circuit are part of the construction. The neodymium magnet measures 95 x 28 x 6 mm, the basket is made of an aluminum alloy with integrated ventilation holes and six-spoke structure, the surround is a Boundary Free IIR rubber surround. The cone is made of pressed pulp with mineral powders, the geometry is exponential V-cone, Xmax is 17 mm, Xmech ±27 mm, the weight is 7.5 kg. Electroacoustic parameters: Re 2.75 Ohm, Fs 33 Hz, Le 1.05 mH, Vas 23.5 l, Mms 175 g, Cms 0.125 mm/N, BL 12.6 T m, Qts 0.63, Qes 0.65, Qms 7.5, SPL 88 dB. Optimized for closed enclosures with a volume of 17–25 liters. Features 10 inch (25 cm) Subwoofer Manufacturer: Hertz Impedance 4 Ohm RMS power 700 W Peak power 1400 W Frequency response 27–500 Hz Neodymium magnet Magnet size 95 x 28 x 6 mm CCAW voice coil Ø 100 mm Voice coil In/Out wound TIL former Voice coil with inner magnet Aluminum shorting ring at the pole IIR rubber surround Boundary Free Exponential V-cone geometry Paper membrane with mineral powders Basket made of aluminum alloy with integrated ventilation holes and six spokes CNC-milled sheets with low carbon content Diamond-cut basket edge with Hertz logo Ergonomically compact design Optimized for closed enclosures 17–25 liters Xmax 17 mm Xmech ±27 mm Weight 7.5 kg Technical data Size 250 mm Impedance 4 Ohm RMS power 700 W Peak power 1400 W Frequency response 27–500 Hz Voice coil Ø 100 mm Re 2.75 Ohm Fs 33 Hz Le 1.05 mH Vas 23.5 l Mms 175 g Cms 0.125 mm/N BL 12.6 T m Qts 0.63 Qes 0.65 Qms 7.5 SPL 88 dB Xmax 17 mm Xmech ±27 mm Magnet neodymium Magnet size 95 x 28 x 6 mm Weight 7.5 kg Cone pressed pulp cone with mineral powders Physical dimensions A 268 mm Physical dimensions B 234 mm Physical dimensions C 159 mm Physical dimensions D 137 mm Physical dimensions E 274 mm Physical dimensions F 50 mm D 212.5 mm Enclosure closed compact volume 17 l Enclosure closed compact Fb 49 Hz Enclosure closed compact Qtc 0.89 Enclosure closed compact B 350 mm Enclosure closed compact H 300 mm Enclosure closed compact T 250 mm Enclosure closed compact mounting hole 235 mm Enclosure closed compact wood thickness 19 mm Sheet cut closed compact A 350 x 300 mm quantity 2 Sheet cut closed compact B 350 x 212 mm quantity 2 Sheet cut closed compact C 262 x 212 mm quantity 2 Enclosure closed power volume 25 l Enclosure closed power Fb 42.5 Hz Enclosure closed power Qtc 0.80 Enclosure closed power B 400 mm Enclosure closed power H 350 mm Enclosure closed power T 260 mm Enclosure closed power mounting hole 235 mm Enclosure closed power wood thickness 19 mm Sheet cut closed power A 400 x 350 mm quantity 2 Sheet cut closed power B 400 x 222 mm quantity 2 Sheet cut closed...563,26 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz Mille Legend MLK 1650.3Hertz Mille Legend MLK 1650.3 is a 6.5 inch (16.5 cm) Speaker Set as a 2-way system with a passive Crossover. The MLCX 2 TW.3 Crossover enables a bi-amping system and offers a contour controller for the woofer and tweeter crossover frequency. The Crossover cut-off points are at 2.5 kHz (Mid/Hi-Cont. ON) and 3.5 kHz (Mid/Hi-Cont. OFF). It is specified with 150 W RMS and 300 W peak power, as well as 4 Ohm impedance. The frequency response is rated at 40 - 25,000 Hz, with a sensitivity of 92 dB SPL. The woofer has a 36 mm voice coil, the tweeter has a 28 mm voice coil and a 35 mm tweeter diaphragm. Weights: Woofer 1.29 kg, Tweeter 0.10 kg, Crossover 0.57 kg. Features 6.5 inch (16.5 cm) Speaker Set 2-way system with passive Crossover MLCX 2 TW.3 Bi-amping feasible (dual amplifier system) Contour controller for woofer and tweeter crossover frequency RMS power 150 W Peak power 300 W Impedance 4 Ohm Sensitivity 92 dB SPL Frequency response 40 - 25,000 Hz Crossover cut-off 2.5 kHz (Mid/Hi-Cont. ON), 3.5 kHz (Mid/Hi-Cont. OFF) Tweeter diaphragm 35 mm Tweeter voice coil 28 mm Woofer voice coil 36 mm Technical Specifications Size 165 mm Crossover type 2-way passive crossover Weight Woofer 1.29 kg Weight Tweeter 0.10 kg Weight Crossover 0.57 kg D 132 mm Re 3.3 Ohm Fs 65 Hz Le 0.24 mH Vas 8.3 l Mms 17.5 g Cms 0.3 mm/N BL 7 T*m Qts 0.47 Qes 0.52 Qms 5.3 Spl 93 dB614,46 €*Shipping: 0,00 €Secure redirect to the provider
-
Hertz Mille Legend MLK 165.3Hertz Mille Legend MLK 165.3 as a 6.5 inch (16.5 cm) Speaker Set with ML 28.3 Legend Tweeter, ML 165.3 Legend Woofer, and MLCX 165.3 Crossover. Boundary Free surround, V-Cone cone made of pressed paper membrane reinforced with cotton fibers, and six-spoke aluminum basket. Driven by a high-density ferrite magnet. Power handling 150 W RMS and 300 W peak value at 4 Ohm impedance. Frequency response 40 to 25 kHz and sensitivity 91 dB SPL. Woofer voice coil 36 mm, Tweeter voice coil 28 mm, Tweeter diaphragm 35 mm. 2-way passive Crossover with 3.5 kHz crossover frequency and 12 dB/Oct. Features 6.5 inch (16.5 cm) Speaker Set Included: ML 28.3 Legend Tweeter, ML 165.3 Legend Woofer, MLCX 165.3 Crossover Size 165 mm Impedance 4 Ohm Power handling RMS 150 W Power handling peak value 300 W Frequency response 40 – 25 kHz Sensitivity 91 dB SPL 2-way passive Crossover Crossover frequency 3.5 kHz, 12 dB/Oct Boundary Free surround V-Cone cone made of pressed paper membrane reinforced with cotton fibers Six-spoke aluminum basket High-density ferrite magnet Tweeter diaphragm 35 mm Woofer voice coil Ø 36 mm Tweeter voice coil Ø 28 mm Weight Woofer 1.65 kg Weight Tweeter 0.075 kg Weight Crossover 0.37 kg Technical specifications Effective diameter D 132 mm Re 3.3 Ohm Fs 65 Hz Le 0.37 mH Vas 9 l Mms 17 g Cms 0.3 mm/N BL 6 T*m Qts 0.57 Qes 0.64 Qms 5.4 SPL 92 dB353,73 €*Shipping: 0,00 €Secure redirect to the provider
-
Does the 165 Hertz monitor only go up to 100 Hertz?
No, a 165 Hertz monitor does not only go up to 100 Hertz. A 165 Hertz monitor is capable of displaying refresh rates up to 165 Hertz, providing smoother and more responsive visuals compared to lower refresh rate monitors. Users can adjust the monitor settings to select the desired refresh rate, up to the maximum of 165 Hertz. **
-
Which cable, 60 Hertz or 144 Hertz, is the best for gaming?
The 144 Hertz cable is generally considered the best for gaming. This is because it offers a higher refresh rate, allowing for smoother and more responsive gameplay. The higher refresh rate of 144 Hertz can provide a competitive edge in fast-paced games, as it reduces motion blur and input lag. Overall, the 144 Hertz cable is preferred by many gamers for its superior performance in gaming scenarios. **
-
'How many per mille are after...?'
I'm sorry, but I need more context or specific information to provide an accurate answer. Please provide more details or clarify your question so I can assist you better. **
-
Is 13 per mille a lot?
Thirteen per mille is equivalent to 1.3%, so it is not a large percentage. However, whether it is considered a lot depends on the context. In terms of interest rates or inflation, 13 per mille would be considered low. However, in terms of mortality rates or failure rates, 13 per mille could be considered high. Therefore, whether 13 per mille is a lot or not depends on the specific situation being considered. **
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.