Buy kopa-houtskooloven.be ?
We are moving the project
kopa-houtskooloven.be .
Are you interested in purchasing the domain
kopa-houtskooloven.be ?
domain@kv-gmbh.de · 0541-91531010
Buy kopa-houtskooloven.be ?
Do you prefer smoking with charcoal or with a smoking vessel?
I prefer smoking with charcoal because it gives the food a distinct smoky flavor that is difficult to achieve with a smoking vessel alone. Charcoal also provides a more traditional and authentic smoking experience, and it allows for better control of the temperature and smoke levels. Additionally, I enjoy the process of tending to the charcoal and adjusting it as needed throughout the smoking process. **
What is the difference between charcoal and wood when grilling?
The main difference between charcoal and wood when grilling is the source of heat. Charcoal is made from partially burned wood, and it burns hotter and more consistently than wood. Wood, on the other hand, can impart a smokier flavor to the food being grilled. Charcoal is often preferred for its convenience and ease of use, while wood is favored by those looking to add a distinct smoky flavor to their dishes. **
Similar search terms for Audiocontrol-LC2i-PRO
Top-Angebote
Products related to Audiocontrol-LC2i-PRO:
-
Audiocontrol LC7i ProThe LC7i Pro from Audiocontrol is a high-low adapter that offers you six channels of active speaker inputs with up to 40 V input voltage. It features fixed and variable outputs with discrete level controls and uses AccuBASS® processing to correct bass roll-off. Thanks to the load selection switch and GTOTM signal detection, you can flexibly adapt it to your needs. The adapter has a compact design and includes an ACR-1 dashboard remote control. Other features include a ground isolation switch and an impressive signal-to-noise ratio of over 124 dB. Features Six channels with active speaker inputs (up to 40 V input voltage) Fixed and variable outputs with discrete level controls AccuBASS® processing for correcting bass drop-off Load selector switch GTOTM Signal Detection Ground fault isolator switch ACR-1 dashboard remote control included Compact design INPUTS Speaker Level Input: 1 (6 channels) Maximal speaker level input: 40 Vrms / 400 W (20 kΩ setting) Input impedance (selectable): 20 Ω, 60 Ω, 20 kΩ OUTPUTS Preamp outputs: 6 (4 channels main outputs, 2 channels bass outputs) Maximal output level: 9.5 Vrms/13 V peak Output gain: +/- 15 dB Output impedance: 150 Ω PERFORMANCE Total harmonic distortion: 0.01 % Signal-to-noise ratio: >124 dB Frequency response: 20 Hz – 20 kHz CONTROL Remote control input/GTO™ signal detection/Audio detection 12 V DC remote control output (always active when the device is turned on) GENERAL Power consumption: 330 mA Recommended fuse rating: 2 A WEIGHTS AND DIMENSIONS Dimensions: 17.8 cm (L) x 12.9 cm (D) x 2.9 cm (H) (including speaker connections) Weight: 0.52 kg200,32 €*Shipping: 0,00 €Secure redirect to the provider
-
Audiocontrol EPICX12The EPICX12 from Audiocontrol is a powerful 12" Subwoofer that impresses with an RMS power of 500 watts and a maximum power of 750 watts. With its Dual Voice Coil technology, it offers you flexibility when connecting to various amplifier configurations. The low resonance frequency of 30.1 Hz allows for a punchy deep bass, while the high-precision motor ensures clean and controlled bass reproduction. The Subwoofer is perfectly tuned for AudioControl's bass restoration technology, providing an ultimate low-end experience. With an outer diameter of 316 mm, it is easy to install and integrates seamlessly into your audio system. Power & Performance: Size: 12 inches (300 mm) RMS Power: 500 watts Maximum Power: 750 watts Impedance: Either 2 or 4 Ohm (Dual Voice Coil) Voice Coil: 2.38 inches (approx. 60 mm) Resonance Frequency (fs): 30.1 Hz Efficiency: 86.6 dB Highlights & Technology: Powerful Deep Bass: Particularly strong in the lowest frequency ranges due to the low resonance frequency of 30.1 Hz. High-Precision Motor: Ensures efficient power transfer and clean, controlled bass reproduction. Dual Voice Coil: Allows maximum flexibility when connecting to various amplifier configurations. Ready for The EPICENTER: Perfectly tuned to AudioControl's bass restoration technology for an ultimate low-end experience. Installation & Dimensions: Outer Diameter: 316 mm (12.4") Cutout Diameter: 281 mm (11.06") Mounting Depth: 153.8 mm (6") Installation Height: 24 mm (1") Magnet Dimensions: 156 x 75 x 25 mm Motor Diameter (with cover): 162 mm (6.4")200,32 €*Shipping: 0,00 €Secure redirect to the provider
-
Audiocontrol EPIC750Experience powerful sound performance with the 1-Channel Amplifier EPIC750 from Audiocontrol. This device offers you a power output of up to 750 Watts RMS at 1 Ohm and comes with an integrated Epicenter® bass processor. Special features include a low pass filter and a subsonic filter for precise sound adjustments. You can easily install the EPIC750, with a 21.1 mm² power connection and compatibility for expanded applications. A convenient ACR-E remote control is also included. Power & Performance: Power at 4 Ohm (14.4 V): 1 x 300 Watts RMS Power at 2 Ohm (14.4 V): 1 x 500 Watts RMS Power at 1 Ohm (14.4 V): 1 x 750 Watts RMS Bridged Power (Strapped, 2 Ohm): 1 x 1500 Watts RMS Frequency Range: 10 Hz – 190 Hz Signal-to-Noise Ratio: 92.2 dBa (Ref. 300 W at 4 Ohm) Filters & Sound Adjustment: Low Pass Filter: 40 Hz – 180 Hz (12 dB/Oct. Linkwitz-Riley) Subsonic Filter: Off – 50 Hz (12 dB/Oct. Linkwitz-Riley) The Epicenter® Boost: Frequency Center 30 Hz – 80 Hz; Gain 0 to 12 dB Input Sensitivity: 500 mV – 12 V RMS Features & Installation: Special Feature: Integrated Epicenter® bass processor (including Epicenter Link) Remote Control: ACR-E remote control included Strappable: Yes Recommended Fuse: 80 A Power Connection: 21.1 mm² (4 AWG) Speaker Connection: 8.4 mm² (8 AWG) Dimensions (metric): Length: 219 mm Width: 155 mm Height: 51 mm209,43 €*Shipping: 0,00 €Secure redirect to the provider
-
Audiocontrol EPIC1000The EPIC1000 from Audiocontrol is a 1-Channel Amplifier that impresses with its remarkable performance and versatility. It delivers 1000 Watts RMS power at 1 Ohm and features a built-in Epicenter® bass processor that optimally enhances low frequencies. With a frequency range of 10 Hz to 190 Hz and a signal-to-noise ratio of 92.1 dBa, it offers excellent sound quality. Installation is made easier with the included ACR-E remote controller and the option for bridging. The amplifier is compactly designed with dimensions of 239 mm in length, 155 mm in width, and 51 mm in height, allowing for easy integration into your existing system. Power & Performance: Power at 4 Ohm (14.4 V): 1 x 400 Watts RMS Power at 2 Ohm (14.4 V): 1 x 700 Watts RMS Power at 1 Ohm (14.4 V): 1 x 1000 Watts RMS Bridged Power (Strapped, 2 Ohm): 1 x 2000 Watts RMS Frequency Range: 10 Hz – 190 Hz Signal-to-Noise Ratio: 92.1 dBa (Ref. 400 W at 4 Ohm) Filters & Sound Adjustment: Low Pass Filter: 40 Hz – 180 Hz (12 dB/Oct. Linkwitz-Riley) Subsonic Filter: Off – 50 Hz (12 dB/Oct. Linkwitz-Riley) The Epicenter® Boost: Frequency Center 30 Hz – 80 Hz; Gain 0 to 12 dB Input Sensitivity: 500 mV – 12 V RMS Features & Installation: Special Feature: Integrated Epicenter® bass processor (including Epicenter Link) Remote Control: ACR-E remote controller included Bridgeable: Yes Recommended Fuse: 100 A Power Connection: 21.1 mm² (4 AWG) Speaker Connection: 8.4 mm² (8 AWG) Dimensions (metric): Length: 239 mm Width: 155 mm Height: 51 mm257,25 €*Shipping: 0,00 €Secure redirect to the provider
-
Could you please provide pro arguments for cooking in school?
Cooking in school provides students with valuable life skills that they can use in their everyday lives. It teaches them about nutrition, healthy eating habits, and the importance of preparing their own meals. Cooking also helps students develop creativity, problem-solving skills, and teamwork as they work together to create dishes. Additionally, it can inspire a passion for cooking and potentially lead to future career opportunities in the culinary industry. **
-
Where do you place the grill for the outdoor BBQ?
When setting up for an outdoor BBQ, it's important to place the grill in a safe and convenient location. Choose a flat, stable surface away from any flammable materials such as dry grass or overhanging branches. It's also a good idea to position the grill in an area with good ventilation to prevent smoke buildup. Additionally, consider the proximity to seating and food preparation areas for easy access. Always follow the manufacturer's guidelines for safe grill placement. **
-
Is grilling with charcoal a physical process or a chemical reaction?
Grilling with charcoal is a physical process. When charcoal is burned, it undergoes a combustion reaction, which is a chemical process. However, the act of grilling itself, which involves placing food over the heat produced by burning charcoal, is a physical process. The heat from the burning charcoal causes the food to cook through conduction and radiation, which are physical processes. Therefore, grilling with charcoal is primarily a physical process. **
-
Can you mix wood and charcoal to make a campfire for grilling?
Yes, you can mix wood and charcoal to make a campfire for grilling. Charcoal provides a consistent and long-lasting heat source, while wood adds a smoky flavor to the food. Start the fire with charcoal and then add wood for flavor. Just be sure to use a grill grate or a safe cooking surface to prevent the flames from directly touching the food. Always follow proper safety precautions when grilling over an open flame. **
Which activated charcoal filters do you use for smoking?
I'm an AI and I don't smoke, but I can tell you that there are various brands of activated charcoal filters available for smoking, such as Zen Bundles and RAW. These filters are designed to help reduce the amount of tar and other harmful substances that are inhaled while smoking. It's important to choose a filter that is specifically designed for smoking to ensure effectiveness. **
What is the difference between grilling and cooking chicken breast?
Grilling chicken breast involves cooking it over direct heat, typically on a grill or barbecue. This method imparts a smoky flavor and creates grill marks on the chicken. On the other hand, cooking chicken breast can refer to various methods such as baking, sautéing, or pan-frying. These methods may not impart the same smoky flavor as grilling, but they can result in a tender and juicy chicken breast with different flavor profiles. **
Top-Angebote
Products related to Audiocontrol-LC2i-PRO:
-
Audiocontrol LC2i PROThe LC2i PRO from Audiocontrol is an advanced 2-channel high-low adapter with impressive features. Specifically designed to elevate your sound system to the next level, the device offers seamless integration with existing factory sound systems and significantly eases the transition thanks to the load selection switch. Additionally, the patented AccuBASS® technology ensures that the bass of your sound system does not get lost at higher volumes. Whether you want to add a subwoofer or plan a complete system – the LC2i PRO provides the optimal signal to get the best out of your amplifiers. Features Two channels with active speaker inputs (up to 40 V input power) Fixed and variable outputs with discrete level controllers AccuBASS® processing for correcting bass roll-off last selection switch GTOTM-Signal sampling Switch for grounding insulation ACR-1 dash remote control included in the delivery Compact Design SPECIFICATIONS ENTRANCES Speaker level input: 1 (2 channels) Maximum speaker level input: 40 Vrms / 400 W (20kΩ setting) Input impedance (selectable): 20Ω, 60Ω, 20kΩ EXITS Preamp outputs: 2 (2 channels Main, 2 channels Bass) Maximum output level: 9.5V rms/13V peak Output gain: +/- 12 dB Output impedance: 150Ω performance capability Total Harmonic Distortion: 0.01% Signal-to-noise ratio: >110 dB Frequency response: 20 Hz - 50 kHz ±1 dB CONTROL Remote In / GTO™ Signal Sense / Audio Sense 12VDC Remote Out (always active when the device is turned on) GENERAL Current consumption: 200 mA Recommended fuse rating: 1 A WEIGHT & DIMENSIONS Dimensions: 17.5 x 8 x 2.5cm (including speaker connections) Weight: 0.34 kg SCOPE OF DELIVERY LC2i PRO ACR-1 20′ Telephone cable Speaker and power connections Handbook warranty card ACCUBASS® STATUS LED MAIN EXIT VARIABLE BASS PERFORMANCE (1 KHZ LP) CLIPPING LED LAST SWITCH TRIGGER MODE SWITCH161,61 €*Shipping: 0,00 €Secure redirect to the provider
-
Audiocontrol LC2iDiscover the LC2i, a top-class high-low adapter from Audiocontrol. This 2-channel high-low adapter is equipped with the innovative ACCUBASS® technology and features an active input circuit that can process signals with speaker levels of up to 400 watts per channel. It impresses with its conversion of incoming signals into high-quality preamplifier signals, allowing you to continue using the factory volume and steering wheel controls. The LC2i is not only powerful but also particularly practical due to its compact design. features Two channels with active speaker inputs - accept 400-watt signals per channel Fixed and variable outputs with discrete level controllers AccuBASS® processing for correcting bass roll-off GTOTM-Signal Sampling Input for optional level remote control Compact Design SPECIFICATIONS ENTRANCES Speaker level input: 1 (2 channels) Maximum speaker input level: 400 W per channel at 4Ω Input impedance: 20kΩ EXITS Preamp outputs: 2 (2 channels Main, 2 channels Bass) Maximum output level: 9.5V rms/13V peak Output impedance: 150Ω performance capability Harmonic Total Distortion: 0.01% Signal-to-noise ratio: >110 dB Frequency response: 33 Hz - 100 kHz ±1 dB CONTROL remote control input 12VDC Remote Out (always active when the device is turned on) GENERAL Current consumption: 150 mA Recommended security value: 1A WEIGHTS & DIMENSIONS Dimensions: 13.7 x 8.25 x 3.81cm Weight: 0.5kg SCOPE OF DELIVERY LC2i Speaker and power connections Handbook warranty card149,99 €*Shipping: 11,95 €Secure redirect to the provider
-
Audiocontrol LC7i ProThe LC7i Pro from Audiocontrol is a high-low adapter that offers you six channels of active speaker inputs with up to 40 V input voltage. It features fixed and variable outputs with discrete level controls and uses AccuBASS® processing to correct bass roll-off. Thanks to the load selection switch and GTOTM signal detection, you can flexibly adapt it to your needs. The adapter has a compact design and includes an ACR-1 dashboard remote control. Other features include a ground isolation switch and an impressive signal-to-noise ratio of over 124 dB. Features Six channels with active speaker inputs (up to 40 V input voltage) Fixed and variable outputs with discrete level controls AccuBASS® processing for correcting bass drop-off Load selector switch GTOTM Signal Detection Ground fault isolator switch ACR-1 dashboard remote control included Compact design INPUTS Speaker Level Input: 1 (6 channels) Maximal speaker level input: 40 Vrms / 400 W (20 kΩ setting) Input impedance (selectable): 20 Ω, 60 Ω, 20 kΩ OUTPUTS Preamp outputs: 6 (4 channels main outputs, 2 channels bass outputs) Maximal output level: 9.5 Vrms/13 V peak Output gain: +/- 15 dB Output impedance: 150 Ω PERFORMANCE Total harmonic distortion: 0.01 % Signal-to-noise ratio: >124 dB Frequency response: 20 Hz – 20 kHz CONTROL Remote control input/GTO™ signal detection/Audio detection 12 V DC remote control output (always active when the device is turned on) GENERAL Power consumption: 330 mA Recommended fuse rating: 2 A WEIGHTS AND DIMENSIONS Dimensions: 17.8 cm (L) x 12.9 cm (D) x 2.9 cm (H) (including speaker connections) Weight: 0.52 kg200,32 €*Shipping: 0,00 €Secure redirect to the provider
-
Audiocontrol EPICX12The EPICX12 from Audiocontrol is a powerful 12" Subwoofer that impresses with an RMS power of 500 watts and a maximum power of 750 watts. With its Dual Voice Coil technology, it offers you flexibility when connecting to various amplifier configurations. The low resonance frequency of 30.1 Hz allows for a punchy deep bass, while the high-precision motor ensures clean and controlled bass reproduction. The Subwoofer is perfectly tuned for AudioControl's bass restoration technology, providing an ultimate low-end experience. With an outer diameter of 316 mm, it is easy to install and integrates seamlessly into your audio system. Power & Performance: Size: 12 inches (300 mm) RMS Power: 500 watts Maximum Power: 750 watts Impedance: Either 2 or 4 Ohm (Dual Voice Coil) Voice Coil: 2.38 inches (approx. 60 mm) Resonance Frequency (fs): 30.1 Hz Efficiency: 86.6 dB Highlights & Technology: Powerful Deep Bass: Particularly strong in the lowest frequency ranges due to the low resonance frequency of 30.1 Hz. High-Precision Motor: Ensures efficient power transfer and clean, controlled bass reproduction. Dual Voice Coil: Allows maximum flexibility when connecting to various amplifier configurations. Ready for The EPICENTER: Perfectly tuned to AudioControl's bass restoration technology for an ultimate low-end experience. Installation & Dimensions: Outer Diameter: 316 mm (12.4") Cutout Diameter: 281 mm (11.06") Mounting Depth: 153.8 mm (6") Installation Height: 24 mm (1") Magnet Dimensions: 156 x 75 x 25 mm Motor Diameter (with cover): 162 mm (6.4")200,32 €*Shipping: 0,00 €Secure redirect to the provider
-
Do you prefer smoking with charcoal or with a smoking vessel?
I prefer smoking with charcoal because it gives the food a distinct smoky flavor that is difficult to achieve with a smoking vessel alone. Charcoal also provides a more traditional and authentic smoking experience, and it allows for better control of the temperature and smoke levels. Additionally, I enjoy the process of tending to the charcoal and adjusting it as needed throughout the smoking process. **
-
What is the difference between charcoal and wood when grilling?
The main difference between charcoal and wood when grilling is the source of heat. Charcoal is made from partially burned wood, and it burns hotter and more consistently than wood. Wood, on the other hand, can impart a smokier flavor to the food being grilled. Charcoal is often preferred for its convenience and ease of use, while wood is favored by those looking to add a distinct smoky flavor to their dishes. **
-
Could you please provide pro arguments for cooking in school?
Cooking in school provides students with valuable life skills that they can use in their everyday lives. It teaches them about nutrition, healthy eating habits, and the importance of preparing their own meals. Cooking also helps students develop creativity, problem-solving skills, and teamwork as they work together to create dishes. Additionally, it can inspire a passion for cooking and potentially lead to future career opportunities in the culinary industry. **
-
Where do you place the grill for the outdoor BBQ?
When setting up for an outdoor BBQ, it's important to place the grill in a safe and convenient location. Choose a flat, stable surface away from any flammable materials such as dry grass or overhanging branches. It's also a good idea to position the grill in an area with good ventilation to prevent smoke buildup. Additionally, consider the proximity to seating and food preparation areas for easy access. Always follow the manufacturer's guidelines for safe grill placement. **
Similar search terms for Audiocontrol-LC2i-PRO
-
Audiocontrol EPIC750Experience powerful sound performance with the 1-Channel Amplifier EPIC750 from Audiocontrol. This device offers you a power output of up to 750 Watts RMS at 1 Ohm and comes with an integrated Epicenter® bass processor. Special features include a low pass filter and a subsonic filter for precise sound adjustments. You can easily install the EPIC750, with a 21.1 mm² power connection and compatibility for expanded applications. A convenient ACR-E remote control is also included. Power & Performance: Power at 4 Ohm (14.4 V): 1 x 300 Watts RMS Power at 2 Ohm (14.4 V): 1 x 500 Watts RMS Power at 1 Ohm (14.4 V): 1 x 750 Watts RMS Bridged Power (Strapped, 2 Ohm): 1 x 1500 Watts RMS Frequency Range: 10 Hz – 190 Hz Signal-to-Noise Ratio: 92.2 dBa (Ref. 300 W at 4 Ohm) Filters & Sound Adjustment: Low Pass Filter: 40 Hz – 180 Hz (12 dB/Oct. Linkwitz-Riley) Subsonic Filter: Off – 50 Hz (12 dB/Oct. Linkwitz-Riley) The Epicenter® Boost: Frequency Center 30 Hz – 80 Hz; Gain 0 to 12 dB Input Sensitivity: 500 mV – 12 V RMS Features & Installation: Special Feature: Integrated Epicenter® bass processor (including Epicenter Link) Remote Control: ACR-E remote control included Strappable: Yes Recommended Fuse: 80 A Power Connection: 21.1 mm² (4 AWG) Speaker Connection: 8.4 mm² (8 AWG) Dimensions (metric): Length: 219 mm Width: 155 mm Height: 51 mm209,43 €*Shipping: 0,00 €Secure redirect to the provider
-
Audiocontrol EPIC1000The EPIC1000 from Audiocontrol is a 1-Channel Amplifier that impresses with its remarkable performance and versatility. It delivers 1000 Watts RMS power at 1 Ohm and features a built-in Epicenter® bass processor that optimally enhances low frequencies. With a frequency range of 10 Hz to 190 Hz and a signal-to-noise ratio of 92.1 dBa, it offers excellent sound quality. Installation is made easier with the included ACR-E remote controller and the option for bridging. The amplifier is compactly designed with dimensions of 239 mm in length, 155 mm in width, and 51 mm in height, allowing for easy integration into your existing system. Power & Performance: Power at 4 Ohm (14.4 V): 1 x 400 Watts RMS Power at 2 Ohm (14.4 V): 1 x 700 Watts RMS Power at 1 Ohm (14.4 V): 1 x 1000 Watts RMS Bridged Power (Strapped, 2 Ohm): 1 x 2000 Watts RMS Frequency Range: 10 Hz – 190 Hz Signal-to-Noise Ratio: 92.1 dBa (Ref. 400 W at 4 Ohm) Filters & Sound Adjustment: Low Pass Filter: 40 Hz – 180 Hz (12 dB/Oct. Linkwitz-Riley) Subsonic Filter: Off – 50 Hz (12 dB/Oct. Linkwitz-Riley) The Epicenter® Boost: Frequency Center 30 Hz – 80 Hz; Gain 0 to 12 dB Input Sensitivity: 500 mV – 12 V RMS Features & Installation: Special Feature: Integrated Epicenter® bass processor (including Epicenter Link) Remote Control: ACR-E remote controller included Bridgeable: Yes Recommended Fuse: 100 A Power Connection: 21.1 mm² (4 AWG) Speaker Connection: 8.4 mm² (8 AWG) Dimensions (metric): Length: 239 mm Width: 155 mm Height: 51 mm257,25 €*Shipping: 0,00 €Secure redirect to the provider
-
Audiocontrol EPIC1500Discover the EPIC1500 from Audiocontrol, a powerful 1-Channel Amplifier that operates with an impressive 1500 Watts RMS at 1 Ohm. This model offers various customization options with an integrated Epicenter® bass processor and a supplied ACR-E remote controller. The EPIC1500 can be bridged if needed and is equipped with a low pass and subsonic filter to tailor the sound. The power supply connects via a 21.1 mm² terminal, while the speakers connect through an 8.4 mm² terminal. With compact dimensions of 269 mm in length, 155 mm in width, and 51 mm in height, the EPIC1500 is versatile. Power & Performance: Power at 4 Ohm (14.4 V): 1 x 600 Watts RMS Power at 2 Ohm (14.4 V): 1 x 1000 Watts RMS Power at 1 Ohm (14.4 V): 1 x 1500 Watts RMS Bridged Power (Strapped, 2 Ohm): 1 x 3000 Watts RMS Frequency Range: 10 Hz – 190 Hz Signal-to-Noise Ratio: 92.8 dBa (Ref. 600 W at 4 Ohm) Filters & Sound Adjustment: Low Pass Filter: 40 Hz – 180 Hz (12 dB/Oct. Linkwitz-Riley) Subsonic Filter: Off – 50 Hz (12 dB/Oct. Linkwitz-Riley) The Epicenter® Boost: Frequency Center 30 Hz – 80 Hz; Gain 0 to 12 dB Input Sensitivity: 500 mV – 12 V RMS Features & Installation: Special Feature: Integrated Epicenter® bass processor (including Epicenter Link) Remote Control: ACR-E remote controller included Bridgeable: Yes Recommended Fuse: 150 A Power Connection: 21.1 mm² (4 AWG) Speaker Connection: 8.4 mm² (8 AWG) Dimensions (metric): Length: 269 mm Width: 155 mm Height: 51 mm314,62 €*Shipping: 0,00 €Secure redirect to the provider
-
Audiocontrol EPIC2000The EPIC2000 from Audiocontrol is a 1-Channel Amplifier that stands out for its impressive power and versatility. With a power output of up to 2000 Watts RMS at 1 Ohm and a bridged power of 4000 Watts RMS at 2 Ohm, this amplifier provides powerful support for any audio system. It features a built-in Epicenter® bass processor and comes with an ACR-E remote controller, giving you additional control options. The frequency adjustment is done through multiple filter options to shape the sound exactly to your preferences. With a compact design of 319 mm in length, 155 mm in width, and 51 mm in height, the EPIC2000 is a powerful and space-saving solution for the discerning music lover. Power & Performance: Power at 4 Ohm (14.4 V): 1 x 800 Watts RMS Power at 2 Ohm (14.4 V): 1 x 1400 Watts RMS Power at 1 Ohm (14.4 V): 1 x 2000 Watts RMS Bridged Power (Strapped, 2 Ohm): 1 x 4000 Watts RMS Frequency Range: 10 Hz – 190 Hz Signal-to-Noise Ratio: 92.9 dBa (Ref. 800 W at 4 Ohm) Filters & Sound Adjustment: Low Pass Filter: 40 Hz – 180 Hz (12 dB/Oct. Linkwitz-Riley) Subsonic Filter: Off – 50 Hz (12 dB/Oct. Linkwitz-Riley) The Epicenter® Boost: Frequency Center 30 Hz – 80 Hz; Gain 0 to 12 dB Input Sensitivity: 500 mV – 12 V RMS Features & Installation: Special Feature: Integrated Epicenter® bass processor (including Epicenter Link) Remote Control: ACR-E remote controller included Strappable: Yes Recommended Fuse: 200 A Power Connection: 53.5 mm² (0/1 AWG) Speaker Connection: 21.1 mm² (4 AWG) Dimensions (metric): Length: 319 mm Width: 155 mm Height: 51 mm429,38 €*Shipping: 0,00 €Secure redirect to the provider
-
Is grilling with charcoal a physical process or a chemical reaction?
Grilling with charcoal is a physical process. When charcoal is burned, it undergoes a combustion reaction, which is a chemical process. However, the act of grilling itself, which involves placing food over the heat produced by burning charcoal, is a physical process. The heat from the burning charcoal causes the food to cook through conduction and radiation, which are physical processes. Therefore, grilling with charcoal is primarily a physical process. **
-
Can you mix wood and charcoal to make a campfire for grilling?
Yes, you can mix wood and charcoal to make a campfire for grilling. Charcoal provides a consistent and long-lasting heat source, while wood adds a smoky flavor to the food. Start the fire with charcoal and then add wood for flavor. Just be sure to use a grill grate or a safe cooking surface to prevent the flames from directly touching the food. Always follow proper safety precautions when grilling over an open flame. **
-
Which activated charcoal filters do you use for smoking?
I'm an AI and I don't smoke, but I can tell you that there are various brands of activated charcoal filters available for smoking, such as Zen Bundles and RAW. These filters are designed to help reduce the amount of tar and other harmful substances that are inhaled while smoking. It's important to choose a filter that is specifically designed for smoking to ensure effectiveness. **
-
What is the difference between grilling and cooking chicken breast?
Grilling chicken breast involves cooking it over direct heat, typically on a grill or barbecue. This method imparts a smoky flavor and creates grill marks on the chicken. On the other hand, cooking chicken breast can refer to various methods such as baking, sautéing, or pan-frying. These methods may not impart the same smoky flavor as grilling, but they can result in a tender and juicy chicken breast with different flavor profiles. **
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.